Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Driveway & Pavers for Frisco Homeowners
A Frisco driveway takes a beating that most of the country never sees: months of hard sun baking the surface, then the clay-heavy soil underneath swelling and shrinking as the wet season and dry season trade places. That movement is why so many driveways here crack along the same lines, sink at the garage apron, or hold water in a low spot long after a storm passes. It’s rarely the pavers or the concrete that fails first; it’s what’s underneath and how the water gets away. Our technicians have up to 11 years of experience reading exactly that, and we handle driveway & pavers under one contract with the same crew mindset that covers roofing, fencing, and additions. Call (833) 620-7367. We answer 24/7.

What Our Driveway & Pavers Service Includes
Seven trades sit under one roof at Construction Frisco, and hardscaping is one we take seriously because it’s the first thing anyone sees when they pull up. Below are the driveway and paver services we build in Frisco and the surrounding towns.
Paver Driveways
A paver driveway is a system, not a surface: a compacted base, a bedding layer, the pavers themselves, edge restraint, and joint sand that all have to work together. You need one when your current drive has settled into dips, when the surface has gone slick or stamped with tire marks, or when you want a look that holds up better than poured concrete in our soil. We build with Belgard and Tremron, set a base depth matched to the load the drive carries, and plan the slope so water runs to the street instead of pooling at the garage.
Concrete Driveways & Concrete Work
Concrete is still the workhorse of Frisco driveways, and it fails for predictable reasons: too-thin a slab, missing control joints, or no proper subgrade prep. You’ll want a new pour when the surface is spider-cracked across whole panels, when sections have lifted at the joints, or when the apron has separated from the garage. We form and pour to a slab thickness suited to vehicle weight, cut joints on a schedule that lets the concrete move instead of tearing, and finish the surface so it doesn’t turn into a slip hazard in the rain.
Asphalt Driveways & Resurfacing
Asphalt gives you a smooth, quiet drive at a lower entry cost than pavers or concrete, and resurfacing can buy years on a base that’s still sound. It’s the right call when the surface has gone gray and raveled, when small cracks are spreading into a web, or when you want a new look without a full tear-out. We evaluate the base first, because a fresh top layer over a failing subgrade just fails again. When the base holds, we clean, level, and lay a new wearing course that ties cleanly into your existing edges.
Driveway Repair & Replacement
Not every driveway needs to be torn out, and we don’t sell a full replacement when a targeted repair will last. Repair makes sense for isolated broken panels, a settled corner, or paver sections that have shifted after tree roots or drainage changed. Replacement is the honest answer when cracks run through the slab, when multiple sections have settled, or when the base has washed out under the surface. We look at the whole picture first, then give you a written line-item quote for whichever path is right.
Patios, Walkways & Pool Decks
Hardscape doesn’t stop at the curb. A paver patio, walkway, or pool deck extends your living space and has to handle the same sun and soil as the drive, plus foot traffic and water splash. You need this work when your patio has settled away from the house, when walkway pavers have heaved at a tree root, or when the pool deck surface has gone rough underfoot. We build these with Unilock and Techo-Bloc, detail the edge restraints, and slope everything away from the foundation and the pool.
Brick Paver Driveway
Brick pavers are the classic look, and they’re a genuinely durable choice when they’re set on a proper base with correct joint sand. They’re worth considering when you want a permanent surface with real color depth, or when you’re matching a brick home and want the drive to belong to it. We source brick and clay pavers through our hardscape brand partners, set them on a compacted base, and lock the edges so they don’t wander. Stamped concrete is the other option when you want a similar texture at a lower entry point; we’ll talk through both so the choice fits your budget and your home.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Driveway & Pavers
Our access to more than 50 name-brand manufacturers spans the whole property, and in hardscaping that means real choices in paver style, color, and thickness rather than whatever happens to be on a pallet. We work with Belgard and Unilock for driveways, patios, and walkways, and both lines give us the range to match a Frisco home’s stone, stucco, or brick exterior. We also build with Tremron and Techo-Bloc, which cover everything from classic driveway pavers to textured pool-deck surfaces.
Knowing a brand’s product line matters more than a logo on a brochure. Each maker has pavers that suit a driveway and pavers that don’t, and the wrong pick fails under vehicle weight no matter how good it looks in the sample. We spec the right brand for the job, show you the options in your price range, and stand behind the installation with a written estimate that doesn’t move once work begins. Whether you’ve got your eye on Belgard, Unilock, or any other make, we can help you sort it out.
Signs You Need Driveway & Pavers Right Now
- Cracks that run through the slab. A hairline crack is normal; a crack that crosses full panels or widens over a season usually means the base underneath has moved. It’s worth an inspection before water gets in and makes it worse.
- Water pooling at the garage apron or in low spots. Standing water after a storm signals a slope or drainage problem, and it puts water against your foundation and your garage floor. Fixing the grade early is far cheaper than fixing what the water damages.
- Pavers that have heaved, sunk, or wandered at the edges. When the surface is no longer even underfoot or the edge restraint has let go, the base or the joint sand needs attention. Re-leveling a section now beats replacing the whole drive later.
- A surface that’s pitted, raveled, or slick when wet. Asphalt that has gone rough and gray, or concrete that holds a sheen in the rain, is a slip risk and a sign the wearing surface is at the end of its life. Resurfacing or sealing can reset the clock.
- Visible settlement at the garage or the street. A dip where the drive meets the garage floor or the curb means the subgrade has compressed. It’s the single most common failure we see in Frisco, and it’s the one that leads to the most expensive repairs if it’s ignored.
Our Driveway & Pavers Process – Step by Step
- 1
Walk the site with you. We look at the whole property, not just the drive: the slope, where water goes now, where the downspouts land, and how the driveway ties into walks and patios. This is when we learn what’s actually failing and what you want out of the project.
- 2
Measure and test the base. We check subgrade condition, probe for soft spots, and note whether the existing base can be reused. On a replacement, we also look at what’s under the slab so the new build isn’t sitting on the same problem.
- 3
Write a line-item estimate. You get a clear breakdown by scope and material, with the brand lines named, so you can compare apples to apples. The estimate is free, and the price is set per job by that written estimate.
- 4
Pull permits and prep the site. Where the city requires a permit, we handle it and line up the inspection. Then we protect the lawn and landscaping, demo what needs to go, and build a properly compacted base in lifts.
- 5
Install, clean up, and walk through. We set the pavers or pour and finish the concrete, restore the edges and joint sand, clean the site, and walk the finished job with you before we call it done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Driveway & Pavers Cost in Frisco?
A paver driveway in Frisco typically runs $7,000 – $18,000 depending on square footage, paver choice, and how much base work the site needs. Concrete driveway installation usually lands between $4,500 and $12,000, and an asphalt drive runs $3,500 – $9,000. A full driveway replacement, when the old surface has to come out, generally falls in the $5,000 – $14,000 range. Sealing is the low-cost maintenance step at $250 – $700, and a paver patio typically runs $3,500 – $11,000.

What moves the number most is the base: if the subgrade is soft or the yard doesn’t drain, prep takes more labor and material before a single paver goes down. Material choice matters too, since a premium Belgard or Unilock paver costs more than a basic concrete pour, and decorative finishes add labor. You avoid overpaying by getting a written line-item quote instead of a lump sum, by asking what happens if the base needs more work than expected, and by checking that permits and inspections are included. Our free estimates spell out scope, brand, and price before you commit. Call (833) 620-7367 for an exact quote.
Driveway & Pavers Near Frisco – Our Service Area
We serve Frisco and the towns around it, including Little Elm, The Colony, Paloma Creek South, Providence Village, Lewisville, Carrollton, and Addison. Response times depend on location and the day’s schedule, and fast dispatch runs from 7am to 7pm, Sunday through Friday. If you’re in a nearby town and want a sense of what we handle, our driveway & pavers page and our driveway & pavers page cover the local ground. For the full picture of how we approach hardscape across the area, start with driveway & pavers.
Serving Frisco, TX – Our Local Coverage Area
We serve Frisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Driveway & Pavers in Frisco
Driveway & pavers covers the full hardscape around your home: paver, concrete, and asphalt driveways, repairs and replacement, sealing, brick and stamped finishes, plus patios, walkways, and pool decks. It includes site evaluation, base prep, material selection from brands like Belgard and Tremron, permitting where required, and installation. Call (833) 620-7367 for an exact quote – estimates are free.
A paver driveway usually takes several days to a couple of weeks depending on square footage and base work, while a concrete pour is faster to install but needs curing time before you park on it. Sealing is typically a short job, and a patio or walkway usually runs a few days. We give you a realistic timeline in the written estimate so you can plan around it. Call (833) 620-7367 for an exact quote – estimates are free.
Most paver driveways here run $7,000 – $18,000, concrete typically falls between $4,500 and $12,000, and asphalt runs $3,500 – $9,000, with driveway replacement at $5,000 – $14,000 and sealing at $250 – $700. Patios typically land in the $3,500 – $11,000 range. The base condition and material choice drive most of the variation. Call (833) 620-7367 for an exact quote – estimates are free.
Yes, we build with Belgard and Unilock, along with Tremron and Techo-Bloc, and our brand access spans more than 50 manufacturers across the trades. We’ll show you the paver lines that suit a driveway versus a patio, so the material fits the load it carries. That’s the difference between a drive that lasts and one that settles in two seasons. Call (833) 620-7367 for an exact quote – estimates are free.
Same-day service is available when the schedule allows, and we answer the phone around the clock. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (833) 620-7367 for an exact quote – estimates are free.
Yes, our workmanship carries a warranty, and material warranties come through the manufacturer for the product line you choose. We spell out both in your written estimate so you know what’s covered and for how long. Where the city requires inspections, we pull permits and pass them before we close out the job. Call (833) 620-7367 for an exact quote – estimates are free.
Clear cars, bins, and anything stored on the drive before we arrive, and let us know about sprinkler lines, invisible pet fencing, or utility runs under the surface. We’ll mark and protect what we can, and we’ll walk the site with you at the start to confirm the plan. For a full property upgrade, we can also coordinate fence installation, windows & doors, and home additions & ADU work under one contract. Call (833) 620-7367 for an exact quote – estimates are free.
Schedule Your Driveway & Pavers Service in Frisco Today
Whether your drive needs a seal, a section repaired, or a full rebuild, we’ll walk the site, explain what’s actually failing, and give you a free line-item estimate with no obligation. One contractor, every trade, licensed and insured, with a written quote that doesn’t change once work starts. Call (833) 620-7367. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Our Construction Frisco team can also coordinate bathroom remodeling and driveway & pavers under a single contract.
Written by the team at Construction Frisco.