Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Farmers Branch
Farmers Branch is a small city that’s already built out, which changes how fence work happens here. Almost every job is infill: replacing a tired fence on a postwar ranch lot, tying a new privacy run into an existing property line, or resetting posts that have heaved in the clay. We know the streets off Valley View and Josey, the alleys behind the older blocks, and the permitting rhythm at City Hall. Call (833) 620-7367 to schedule a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Farmers Branch Homeowners Call Construction Frisco for Fence Installation
Farmers Branch homeowners tend to call us after a fence has already failed once. Posts leaning, a gate that drags across the concrete, panels separating at the rails. In a city this full, there’s rarely room to just “add on” – the fix usually means tearing out and rebuilding the run properly, footings and all. That’s the conversation we start with.
We’re one contractor covering seven trades under a single contract, so if the fence project turns up something bigger – a carport enclosure that was never permitted, a room addition along the property line that has to be brought up to code before the fence passes inspection – you’re not hunting down a second and third contractor to sort it out. You have one point of accountability from estimate through final walkthrough. Our technicians have up to 11 years of experience, and estimates are always free and written line by line.
We know what the older ranch neighborhoods here actually look like up close. Tight side yards. Mature pecan and oak canopies that dictate where a fence line can even run. Alley access that limits how equipment gets to the back of the lot. That local familiarity is why Farmers Branch homeowners keep calling back for their next project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Farmers Branch
Wood Fence Installation
Wood is still the workhorse fence in Farmers Branch, and for good reason: it fits the scale of these postwar ranch homes and it’s repairable one section at a time. We spec species and post treatment for North Texas heat, set posts to proper depth in the clay, and brace every gate frame. If you want a fence that matches the house rather than fighting it, wood gets you there.

Privacy Fence Installation
Privacy runs here usually go along a shared property line where the neighbor’s roofline is close and the alley behind is open. We plan the height, board spacing, and gate placement around what’s actually visible from your yard, then confirm the property line before we set a single post. Getting that line right up front avoids the dispute later.

Fence Gate Installation
Gates are where most fences fail first. The weight of a wide drive gate on clay that moves is a real load, so we size the frame and hardware for the span rather than reusing a standard kit. If you have an existing gate that binds every summer, that’s usually a footing problem, not a hinge problem.

Aluminum Fence Installation
Aluminum suits the front-yard applications in Farmers Branch where a wood privacy run would look heavy – pools, side entries, decorative perimeter. Ameristar and Jerith both give you clean lines and a finish that holds up to sun. It won’t rust, and it doesn’t need staining.
We also handle chain link, iron, fence repair, and commercial fencing along the I-35E/LBJ corridor and the Valwood industrial park, where a tenant build-out often comes with a perimeter requirement. If you’re comparing materials or want the full picture of what we install, see our fence installation page.
Trusted Brands We Service in Farmers Branch
We work with Ameristar and Jerith for aluminum and ornamental systems, Bufftech for vinyl, and ActiveYards for vinyl and composite options – brands we can specify with confidence because we know how each one performs in North Texas heat. We don’t stock parts locally and we don’t pretend to. What we do is source the right product for your fence line and get it moving quickly, so the project doesn’t stall waiting on a material decision. Choose your material and we’ll make it work.
Common Fence Installation Problems We See in Farmers Branch Homes
- Posts set too shallow in expansive clay. Farmers Branch sits on soil that shrinks and swells with wet-dry cycles, and a post footed above the active zone will heave and tilt within two to three years. Once that happens, gates bind and panels rack out of line.
- Unpermitted carport or room enclosures along the fence line. In the older ranch blocks, a previous owner often enclosed a carport or added a room without a permit, and the fence line follows it. When a new fence permit is pulled, that prior work can surface and has to be brought up to code before the fence inspection signs off.
- Mature trees and tight alley access. Established canopies and narrow alleys complicate equipment staging, and removal of an old fence line around root systems takes care. Rushing that step is how existing fences and landscaping get damaged.
- Failed or undersized framing on older runs. Original fence framing from decades past is often undersized for the span, which is why a gate that worked fine for years suddenly sags. The fix is structural, not cosmetic.
See the difference
Before
After
Before
After
Before
AfterPricing for Fence Installation in Farmers Branch, TX
Here’s what fence work typically runs in Farmers Branch. These are estimated ranges, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Vinyl Fence Installation | $3500 – $9000 |
| Aluminum Fence Installation | $4000 – $10000 |
What moves the number is linear footage, post depth required by the clay, gate count and hardware, removal and disposal of the old fence, and any code work a permit uncovers. We inspect the lot first, write allowances into the contract, and price any surprise in writing for your approval before we touch it. No change orders you didn’t agree to. Call (833) 620-7367 for a free written estimate.
We Also Serve Cities Near Farmers Branch
We work throughout the surrounding area, including Addison, Carrollton, Coppell, and Lewisville. The same clay soils, the same tight infill lots, the same permitting realities carry across these neighboring cities, so the approach doesn’t change much from one to the next. If you’re just outside Farmers Branch, call and we’ll confirm coverage.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Farmers Branch
Yes, most fence installations in Farmers Branch require a permit, and unpermitted prior work can absolutely affect it. This is the step generic fence pages never mention: because Farmers Branch is fully built out, fence lines often follow a carport enclosure or room addition a previous owner built without a permit. When the city reviews your fence permit, that prior work can surface and must be brought up to code before the fence inspection can be signed off. We inspect for this up front so it doesn’t blindside you mid-project. Call (833) 620-7367 for a free estimate – estimates are free.
The expansive clay here shrinks and swells with wet-dry cycles, and posts set in shallow footings will heave and tilt within a few seasons. A qualified local pro sets posts below the clay’s active zone at proper footing depth, which is the difference between a fence that holds its line and one that racks out. Gates are the first thing to fail when footings are wrong. Call (833) 620-7367 for an exact quote – estimates are free.
Yes, it can, but it takes planning around the trees and the staging. Mature canopies in the older ranch neighborhoods limit where equipment can go, and narrow alley access means the crew has to sequence removal and delivery carefully. Done right, the existing fence comes out without damaging the landscape. Call (833) 620-7367 to schedule a free estimate.
We stop, document, and price it in writing before anyone touches it. That’s the whole process, and it’s why we inspect the lot and the property line first and write allowances into the contract. If removal uncovers an unpermitted enclosure or a footing problem beyond what we scoped, you get a written number to approve – not a surprise on the final invoice. Call (833) 620-7367 for a free estimate.
The city inspects the fence after installation and signs off before the job is considered complete. On lots where prior unpermitted work is discovered, that code work has to be addressed first, so the fence inspection can pass. We handle pulling the permit and scheduling the inspection as part of the project. Call (833) 620-7367 for an exact quote – estimates are free.
Get Your Free Fence Estimate in Farmers Branch
A fence is one of the few exterior projects that touches every edge of your property, so it’s worth getting the footing, the permitting, and the material right the first time. We inspect the lot, confirm the property line, check for anything a permit might uncover, and put every number in a written line-item estimate before work begins. Licensed and insured, with a workmanship warranty behind the installation. Call (833) 620-7367 for your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Frisco.