Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Frisco Homeowners Choose Kohler Construction
We provide independent Kohler installation, repair and service in Frisco, TX, covering the fixtures and systems that sit at the center of a bathroom or kitchen: faucets, shower valves and trim, toilets, and kitchen sinks. What sets our Kohler work apart is focus. We know the tolerances these products are built to, we fit quality parts that match them, and we make the call on repair versus replacement without a manufacturer’s sales sheet in front of us. One contractor, every trade, one point of accountability from estimate through final walkthrough.

To be clear about what we are: Construction Frisco is an independent Kohler service provider. We’re not affiliated with, authorized by, or endorsed by Kohler. That independence matters. It means our recommendation is based on your fixture and your water, not on a brand agreement. Our technicians have up to 11 years of experience, and we work across seven trades under one contract. Call (833) 620-7367 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Frisco for Your Kohler Construction?
Frisco is one of the fastest-growing large cities in the country, and almost none of its housing stock predates the 1990s. The bulk of it went up in the 2000s through 2020s boom. Most of the homes we walk into here are production builds and newer additions, which shapes the Kohler work we do. Fixtures are often a decade or two into service, past the builder warranty, and starting to show the small failures that come with age and local water. That’s a different job than servicing a fixture from the 1970s.
Our technicians have handled Kohler Artifacts faucets, Memoirs toilets, Purist shower trim and valves, and Riverby and Whitehaven kitchen sinks. We know where ceramic cartridges wear, how pressure-balance valves behave when supply pressure runs high, and why a finish starts to pit. We fit genuine Kohler OEM cartridges, valves and seals on critical components to preserve fit and finish, and quality aftermarket parts on non-proprietary items like supply lines and wax rings when they meet or exceed OEM specs. Warranty-safe practice is part of the job: we document what we replace and how, so a later claim isn’t undercut by sloppy work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Frisco
These are the failures we see most often on Kohler products in Frisco homes. They’re predictable once you know what to look for.
- Ceramic cartridge wear in Artifacts and Purist faucets. A drip at the spout or a handle that turns hard is usually a worn ceramic cartridge. Frisco’s hard water leaves mineral deposits that score the cartridge surfaces, and high supply pressure accelerates the wear. The fix is usually a cartridge replacement, not a new faucet.
- Flush valve seal and fill valve failure in Memoirs toilets. A toilet that keeps running after the flush, or flushes weakly, often has a worn flush valve seal or a fill valve that no longer shuts off cleanly. Sediment in the supply is a common contributor. Phantom flushing – the bowl refilling on its own hours later – points the same direction.
- Finish pitting or flaking on Kohler Vibrant finishes. Abrasive or acidic cleaners strip the protective layer over time, and the finish starts to pit or flake. We see it most in homes where a harsh bathroom spray has been used for years. The finish itself can’t be repaired once it’s gone; the conversation turns to replacement or a finish-matched alternative.
- Cracked or leaking cast iron sink enamel. Enamel on a cast iron sink can craze or crack, and once it does, water gets under the edge and the crack spreads. We assess whether refinishing is viable or whether a new sink is the more honest answer.
- Undermount bracket corrosion in Riverby and Whitehaven sinks. The brackets that hold an undermount sink to the counter can corrode or loosen over time, especially where moisture sits against the hardware. A sink that sags or shows a gap at the counter seam usually has this problem underneath.
Kohler Parts & Our Repair-vs-Replace Approach
We don’t stock Kohler parts, and we’re not a Kohler dealer. What we do is source genuine Kohler OEM cartridges, valves and seals for the components where fit and finish actually matter, and quality aftermarket parts for the everyday items – supply lines, wax rings, mounting hardware – where a part that meets or exceeds OEM specs does the job. That choice is a service, not a shortcut.
Repair versus replace comes down to three things: the age of the fixture, the cost of the part and labor, and what a new Kohler model would cost against that. For an older Kohler fixture with a worn cartridge, repair is almost always the right call. For a cast iron sink with spreading enamel cracks or a finish that’s already pitted through, we’ll tell you plainly when replacement makes more sense. You get a clear recommendation either way, and a written line-item quote so the final price is set by the estimate. Call (833) 620-7367 to talk through your fixture before you decide.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We identify the exact fixture and its failure. On a Kohler faucet that means checking the cartridge, the handle rotation and the supply pressure. On a Memoirs toilet it means testing the flush valve seal, the fill valve and the water level.
- 2
Repair or install. We shut off the water, replace the worn component with the right part – OEM Kohler for critical components, quality aftermarket for the rest – and set the fixture to Kohler’s tolerances for flow and alignment.
- 3
Test. We run the fixture under real pressure, check for drips at the spout, the handle and the supply connections, and confirm the flush cycle completes cleanly before we call it done.
- 4
Warranty and documentation. We note what was replaced and how, so the work stays warranty-safe and you have a record if a future claim comes up.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Frisco
We service and install the Kohler products that carry the most daily use. That includes kitchen and bathroom faucets, including the Artifacts and Purist collections, and the ceramic cartridges inside them. It includes shower valves and trim, pressure-balance valves, and the walk-in shower systems built around them. It includes toilets like the Memoirs series and the flush and fill valves that keep them working. And it includes cast iron and vitreous china sinks, including the Riverby and Whitehaven kitchen sinks and the undermount hardware that holds them.
On the installation side, we handle full bathroom remodeling, walk-in showers and shower remodeling, and the tile and fixture work that finishes a room. Fixtures get coordinated, not assembled piecemeal, because the fixture, the tile and the plumbing have to agree.
We Also Service These Brands
Kohler is one part of a broader picture. We also work with KraftMaid cabinetry, Cambria and Silestone surfaces, and Toto fixtures, and we spec the right brand for the job rather than pushing one name across every room. That’s the advantage of a contractor working across seven trades with access to more than 50 manufacturer brands: you get a recommendation that fits your home, not a single-brand catalog.
FAQs – Kohler Construction Service in Frisco
No. We are an independent Kohler service provider. We’re not affiliated with, authorized by, or endorsed by Kohler, and we’re not a Kohler dealer. That independence lets us recommend the best fix – OEM or quality aftermarket – without bias toward a manufacturer agreement.
Yes. We source genuine Kohler OEM cartridges, valves and seals for critical components to preserve fit and finish, and quality aftermarket parts for non-proprietary items like supply lines and wax rings when they meet or exceed OEM specs. We don’t stock parts; we source the right one for your fixture. Call (833) 620-7367 and we’ll talk through what your fixture needs.
Most single-fixture repairs, like a cartridge or flush valve replacement, are done in a single visit. A walk-in shower installation or a full bathroom remodel runs across multiple visits and depends on the scope you approve. Your written estimate lays out the sequence, and the final price is set by that estimate.
We cover Kohler faucets, shower valves and trim, toilets, and cast iron and vitreous china sinks, along with the walk-in shower systems and full bathroom remodeling work built around them. If you’re unsure whether your fixture is in scope, call and ask.
Service performed with the correct parts and documented properly doesn’t void a Kohler warranty. We use OEM Kohler components on critical parts and keep a record of what was replaced, which is what a warranty claim needs. We’re independent, so we can’t speak for Kohler’s decisions – we simply do the work in a way that keeps the claim clean.
Typical estimated ranges for the work we do around Kohler fixtures in Frisco are below. These are estimates only; the written estimate sets the final price.
| Service | Typical estimated range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (833) 620-7367 for an exact quote. Estimates are free.
In most cases you can replace just the cartridge. A drip or stiff handle on an Artifacts faucet is usually cartridge wear, and the faucet body itself is fine. Frisco’s hard water speeds that wear, which is why cartridge replacement comes up often here. Replacing the cartridge with an OEM Kohler part is the standard fix and costs far less than a new faucet. Call (833) 620-7367 to schedule an estimate.
A worn flush valve seal or a fill valve that no longer shuts off cleanly is the usual cause. Sediment in the supply water keeps the seal from seating, and the bowl refills on its own. Replacing the seal or fill valve normally solves it. Call (833) 620-7367 and we’ll take a look.
It depends on where the crack is and how far it’s spread. A small surface crack can sometimes be refinished. A crack that’s letting water under the enamel usually means replacement is the more honest answer. We’ll give you a clear recommendation and a written estimate either way. Call (833) 620-7367.
Skip abrasive pads and acidic or harsh bathroom cleaners, and rinse and dry the fixture after cleaning. Those cleaners strip the protective layer, and once the finish pits it can’t be restored. A mild soap and a soft cloth is all a Vibrant finish needs. If yours has already started to pit, call (833) 620-7367 to talk through replacement options.
Often, yes. A walk-in shower or shower replacement can usually work with the existing drain and supply locations if the layout allows. Where the valve position or drain has to move, that’s a bigger scope and shows up in the written estimate. A typical job of this kind starts with a stiff handle and a slight drip from the showerhead, traced to a worn cartridge or a failing pressure-balance valve. A qualified local pro shuts off the water, replaces the cartridge or valve with an OEM Kohler part, flushes the line, and restores smooth operation. Call (833) 620-7367 and we’ll assess your bathroom before you commit to anything.
Book Your Kohler Service in Frisco, TX
If you have a Kohler faucet that drips, a Memoirs toilet that won’t stop running, or a bathroom you’re ready to remodel around a Kohler walk-in shower, call (833) 620-7367 for a free estimate. Our technicians have up to 11 years of experience, we work across seven trades under one contract, and your written estimate sets the final price. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Construction Frisco is an independent Kohler service provider.
Written by the team at Construction Frisco.