Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Frisco Homeowners Choose Dvele Construction
We provide independent Dvele construction service in Frisco, TX – kitchen and bathroom remodeling, roof repair, and panel-system repairs on Dvele prefab and modular homes. What sets our Dvele work apart is system knowledge: Dvele homes are built from panelized wall and roof assemblies, so the work has to respect factory spline joints, weather-barrier continuity, and MEP chases instead of treating the house like ordinary stick frame. We are an independent service provider. We are not affiliated with, authorized by, or endorsed by Dvele, and we make no claim of factory authorization or warranty endorsement. Our technicians have up to 11 years of experience, and they’ve worked on enough prefab systems to know where the seams are. Call (833) 620-7367 to talk through your project. We answer 24/7.

Why Trust Construction Frisco for Your Dvele Construction?
A Dvele home doesn’t fail the way a tract house fails. The panels are engineered, the seams are intentional, and the weather barrier was applied in a factory before the modules ever met a crane. Repairing one badly is easy; repairing one correctly takes familiarity with how the system was assembled.
That familiarity is what we bring. Our technicians understand factory spline joints, how weather-barrier continuity runs across panel seams and roof-wall transitions, and where MEP chases sit inside a panelized wall. When a fixture sits proud or a chase is misaligned, they know it’s usually a chase problem rather than a plumbing problem, and they plan the finish-out around it instead of furring out a wall and calling it solved.
We also work warranty-safe. That means Dvele-approved sealants and flashing kits where they’re available, careful documentation of what was opened and resealed, and no improvisation on a joint the factory engineered. For standard fixtures in a Dvele home – Kohler, Delta, Moen, Toto – quality aftermarket parts are fine, and we’ll say so plainly. Where a part touches the building envelope, we don’t substitute. We’re independent, not authorized, and that independence is exactly why we can tell you honestly when a panel should be repaired and when it shouldn’t be touched.
Frisco is one of the fastest-growing large cities in the country, and almost none of its housing stock predates the 1990s. Most of what we see here went up in the 2000s-to-2020s boom, which means the calls we get skew toward new-build and warranty-era work rather than deep remodel on old houses. A Dvele home fits that pattern, and so does the way we approach it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Frisco
- Spline-joint separation at panel seams. Factory spline joints are designed to hold two panels into one plane. Over time, movement at the seam can open the joint slightly, and that’s when air starts moving through it. Around windows, the same separation lets water in behind the frame instead of shedding it. It’s rarely dramatic – a draft you notice near an exterior wall, a faint stain at a seam – but it’s the single most common Dvele issue we’re called about.
- Factory weather barrier compromised at roof-wall transitions. The barrier is applied in the factory, which is a strength of the system. But modules travel, and they get set by crane. At roof-wall transitions, the barrier can be nicked, stretched, or poorly lapped after the set. The result is water intrusion that shows up far from where the damage happened.
- MEP chase misalignment. Mechanical, electrical, and plumbing chases run through the panelized assemblies. When a chase lands slightly off, fixtures end up sitting proud of the finished wall, or the finish-out needs extra furring to make the geometry work. It’s a dimensional problem disguised as a cosmetic one.
- Floor-to-wall junction gaps. Where panels meet the floor system, small gaps can telegraph through as squeaks or an uneven subfloor before flooring goes down. Caught before finish, it’s a straightforward fix. Caught after, it’s a flooring problem too.
- Roof assembly and flashing wear in a hail-and-wind climate. North Texas hail and straight-line wind events drive a steady cycle of roof replacement and repair across Frisco. On a Dvele roof assembly, that cycle stresses flashing and panel-to-roof connections first. A leak that looks like a shingle problem is often a transition problem.
Here’s how a Dvele panel issue usually presents. A homeowner notices a draft or a water stain near a panel joint after a heavy rain. The usual cause is a failed spline gasket or sealant at the factory seam. A qualified local pro typically opens the joint, replaces the gasket, applies new weather-barrier tape, and re-seals – often coordinating with Dvele’s technical support for panel-specific details. That coordination matters. The panel system is proprietary, and the people who built it know things the field doesn’t.
Dvele Parts & Our Repair-vs-Replace Approach
Our rule on a Dvele home is simple: envelope parts are matched to the system, and standard fixtures get quality parts that fit. Where Dvele-approved sealants and flashing kits are available, we use them. They exist because the panel system has specific chemistry and specific geometries, and a generic sealant will fail sooner at a spline joint than the right one will. On standard plumbing fixtures – Kohler, Delta, Moen, Grohe, Toto, American Standard – high-quality aftermarket parts are fine, and we’ll tell you when they are. We don’t claim to stock OEM or genuine Dvele parts, and we’re not a dealer.
Repair versus replace is a judgment call, and it usually lands on repair. Spline joints and weather barriers are repairable, and repairing them is almost always preferable to replacing panels. Replacement only makes sense when there’s structural damage to the panel itself – not a compromised gasket, not a nicked barrier. Panels are expensive to source and disruptive to swap; joints and barriers are not. We’ll show you what we found and give you a written, line-item estimate before any work starts, and the price on that estimate is the price. Call (833) 620-7367 to talk it through – estimates are free.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We start by identifying what kind of problem it actually is. A draft near a panel seam might be a failed spline gasket, a barrier breach at the roof-wall transition, or both. We open and inspect rather than guess, and we trace water intrusion back to its entry point – which on a panelized system is often not where the stain shows.
- 2
Repair or install. For a spline joint, that usually means opening the joint, replacing the gasket, applying new weather-barrier tape, and re-sealing with the right sealant. For a barrier breach, we restore continuity at the transition. For a kitchen or bathroom remodel inside a Dvele home, we plan the finish-out around the chase locations so fixtures land where they should the first time.
- 3
Test. We check the repair against the condition that caused it. A sealed joint gets checked for air movement, and a barrier repair gets checked for how water sheds at the transition. If the fix doesn’t hold up to the test, we haven’t finished.
- 4
Warranty and documentation. We document what was opened, what was replaced, and what sealant or flashing kit was used. That record matters on a Dvele home, because anything that touches the building envelope should be traceable. Our work is backed by a workmanship warranty, and the estimate you sign is the price you pay.
Dvele Products We Service & Install in Frisco
Dvele builds prefab and modular homes, and our Dvele work covers the parts of those homes that need service, repair, or finish-out. On the envelope side, we handle spline-joint repairs, weather-barrier restoration at roof-wall transitions, and roof repair on the panelized roof assembly. On the finish side, we do full kitchen remodeling and full bathroom remodeling inside Dvele homes, including walk-in shower installation and tub-to-shower conversions where the panel layout allows. We plan plumbing and electrical rough-in around the factory MEP chases, not through them.
We also support Dvele projects from the finish side out: flooring transitions where panel meets floor, fixture packages coordinated from a single source, and the inevitable punch list a new prefab home produces. We don’t stock Dvele products, and we don’t sell them. We service and install the parts of a Dvele home that need a contractor who knows the system.
We Also Service These Brands
Our Dvele work sits inside a broader brand portfolio, which matters because a home isn’t built from one brand. We work with KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone surfaces, and Kohler, Moen, Delta, Grohe, Toto, and American Standard fixtures. On the exterior, GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral roofing; James Hardie siding and Schluter waterproofing systems. That breadth means we can spec the right brand for the job instead of forcing one into it.
FAQs – Dvele Construction Service in Frisco
No. We are an independent service provider and we are not affiliated with, authorized by, or endorsed by Dvele. We don’t claim factory authorization or warranty endorsement. We do bring hands-on experience with Dvele’s panelized construction, and when a repair needs panel-specific detail, we coordinate with Dvele’s technical support directly. Call (833) 620-7367 with your address and a description of what you’re seeing.
Yes. Where Dvele-approved sealants and flashing kits are available, we use them, because the panel system has specific chemistry and geometries that generic materials don’t match. For standard fixtures like Kohler and Delta, quality aftermarket parts are fine. We don’t stock or claim OEM Dvele parts, and we’ll always tell you which is which before we order.
A spline-joint or weather-barrier repair is typically a contained job, often finished in a visit or two once the cause is confirmed. A full kitchen remodel or bathroom remodel inside a Dvele home follows the same timeline as any finish-out of that scope, with extra time budgeted for planning around the MEP chases. The written estimate states the schedule. Call (833) 620-7367 for an exact quote – estimates are free.
We cover the parts of a Dvele prefab or modular home that need a contractor: spline joints, weather-barrier repairs at roof-wall transitions, roof repair, and full kitchen and bathroom remodeling inside the panel system. We don’t sell Dvele homes or panels, and we don’t claim to carry their parts. We repair, install, and service with quality parts that fit.
Not necessarily, but the envelope is where warranty risk lives. Anything that touches a panel seam, the factory weather barrier, or a roof-wall transition should be done with the correct sealant and flashing kit and documented properly. That’s the approach we take: matched materials, careful documentation, and coordination with Dvele’s technical support when a panel-specific detail is in play. We can’t speak for Dvele’s warranty terms. Call (833) 620-7367 and we’ll walk you through what your repair involves.
It depends entirely on scope. A roof repair on a Dvele roof assembly typically runs $400 – $1,800. A full bathroom remodel runs $9,000 – $28,000, and a full kitchen remodel runs $14,000 – $45,000. Those are typical estimates, and the written line-item estimate sets the final price. Call (833) 620-7367 for an exact quote – estimates are free.
Can I remodel a Dvele kitchen without voiding the home’s warranty?
Usually yes, if the work stays off the building envelope. Inside the home, a kitchen remodel is finish work – cabinetry, surfaces, fixtures – and the parts that carry warranty risk are the panel seams, the factory weather barrier, and the roof-wall transitions. Where a remodel touches those, which happens on exterior-wall runs and venting, the work has to be done with matched materials and documented. We plan the layout around the factory MEP chases so the panel system isn’t cut into unnecessarily. We can’t speak for Dvele’s warranty terms, so check with Dvele before work starts, then call (833) 620-7367 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterHow do I find a contractor who understands Dvele panelized construction?
Ask three questions before you hire. Whether they’ve worked on panelized or modular assemblies, how they handle spline joints and weather-barrier continuity at a roof-wall transition, and whether they’ll coordinate with the manufacturer for panel-specific details. A generic remodeler will answer the first with “sure” and stumble on the second. A Dvele home isn’t stick frame, and the failure points are different. Our network connects homeowners only with local pros who have hands-on Dvele experience. Call (833) 620-7367 and we’ll talk through your project.
What’s the typical cost to repair a leaking spline joint on a Dvele home?
Most spline-joint and weather-barrier repairs fall within our roof repair range of $400 – $1,800, because the work is contained to the joint itself: open it, replace the gasket, apply new weather-barrier tape, re-seal. Cost climbs if the leak has spread into the surrounding assembly and damaged sheathing or framing behind the panel. That’s why we trace water back to its entry point before quoting. Those are typical ranges, and the written estimate sets the final price. Call (833) 620-7367 for an exact quote – estimates are free.
Can I install a walk-in shower in a Dvele bathroom?
Yes, with planning around the MEP chases. A walk-in shower installation typically runs $4,500 – $12,000, and a tub-to-shower conversion runs $3,500 – $10,000. The design question on a Dvele home is where the drain and supply lines land relative to the factory chases – that determines whether the shower can use the existing rough-in or needs a repositioned drain. Walking through that before demo prevents the furring and proud fixtures that happen when a chase gets ignored. Those are typical estimates, and the written estimate sets the final price. Call (833) 620-7367 to schedule a free estimate.
Does Dvele require specific roofing materials for warranty?
We can’t speak for Dvele’s warranty terms, and we won’t guess at them. What we can tell you is that on a panelized roof assembly, the transition details matter more than the shingle brand: how flashing meets the panel, how the weather barrier laps at the roof-wall junction, and how the assembly sheds water at its seams. We carry GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral roofing systems, and we ask Dvele what the warranty requires before we order. Get the answer from Dvele first, then call (833) 620-7367 for a free estimate.
Dvele Construction Cost Estimates for Frisco Homes
| Service | Typical Estimated Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Repair | $400 – $1,800 |
Every figure above is a typical estimated range, not a quote. The written line-item estimate sets the final price, and there are no change orders once it’s signed. Call (833) 620-7367 for an exact quote – estimates are free.
Book Your Dvele Service in Frisco, TX
If your Dvele home has a draft at a panel seam, a stain near a roof-wall transition, a kitchen or bathroom that’s ready for finish-out, or a roof that took a beating this hail season, we’ll diagnose it properly and quote it in writing before anything starts. Our technicians have up to 11 years of experience, our work is backed by a workmanship warranty, and estimates are free. Call (833) 620-7367. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Frisco.