Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Frisco Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction service in Frisco, TX: custom frameless shower enclosures, semi-frameless bypass tub doors, and custom mirror work, installed and repaired by local professionals who do this every week. What sets our Mr-Glass work apart is the part nobody advertises – wall blocking, plumb and level, and flashing discipline behind the glass. Because Mr-Glass is a franchise-style glass and screen brand rather than a manufacturer, the real variable in a Frisco job is the independent installer’s fabrication tolerances, not a dealer badge. Our network vets local Mr-Glass-experienced pros on that standard. We are independent: not authorized by, affiliated with, or endorsed by Mr-Glass, and we never claim otherwise. Call (833) 620-7367 to schedule a free estimate.

Why Trust Construction Frisco for Your Mr-Glass Construction?
Our technicians have up to 11 years of experience, and a good share of it has been spent on glass. They know how a 3/8″ tempered panel loads a hinge, why a neo-angle sweep is harder to seal than a straight one, and what a semi-frameless header is actually doing. That familiarity is what separates a Mr-Glass enclosure that swings true in year five from one that racks by year two.
We repair, install, and service Mr-Glass equipment with quality parts that fit it. We don’t claim to stock OEM or genuine Mr-Glass parts, and we’re not a Mr-Glass dealer or a “sales & service” counter. We are an independent shop, and we use OEM Mr-Glass hardware where the original series is still supported because aftermarket hinges rarely match the hole pattern or the glass thickness. For discontinued series, quality aftermarket stainless hardware and new tempered panels are usually the right call.
Warranty-safe service matters here. Cutting, drilling, or re-hanging glass outside the manufacturer’s install guidance is one of the fastest ways to lose coverage on a panel. We work to keep your enclosure within spec so a future claim stays clean, and we tell you upfront when a repair could put that at risk. Frisco homeowners get a straight answer before anyone touches the glass. Call (833) 620-7367. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Frisco
Most Mr-Glass calls in Frisco trace back to a handful of causes. Here’s what we see, and why it happens.
- Frameless panels that rack and drift. The glass loads a single stud or a drywall patch instead of proper structural blocking, so the enclosure twists slightly every time the door swings. You notice it as a growing gap at the hinge side and a door that won’t sit flush in its reveal. Left alone, the stress works its way into the glass at the hinge points.
- Yellowed sweeps and seals on bypass doors. The clear vinyl sweeps on semi-frameless and framed bypass doors harden and turn amber within a few Texas summers. Once they stiffen they stop wiping the glass, water tracks past the curb, and the flooring next to the shower starts to show it.
- Mirrors measured off the rough opening. When a custom mirror or glass panel is templated before tile and drywall are finished, the reveal comes out uneven and can’t be shimmed without relocating the whole panel. The fix is a re-template after finishes, not a bigger bead of silicone.
- Waterproofing compromised behind the glass line. In tub-to-shower conversions the glass can look perfect while moisture migrates behind the tile. The enclosure isn’t the problem; what’s behind it is. This one hides until the grout starts to darken or the pan smells musty.
- Chipped hinge-edge glass after a hard door swing. Tempered glass that takes a hit at the hinge edge can chip, and a chip on tempered glass is a failure point, not a cosmetic flaw. It usually calls for a new door panel rather than a patch.
A typical Mr-Glass frameless enclosure call starts with a door that drops or drags and a visible gap at the hinge side. Pulling the panel usually reveals that the wall was never blocked for glass and that the original installer relied on drywall anchors. A qualified local pro opens the wall to add solid blocking, verifies plumb and level across the curb, then rehangs the OEM hinges or replaces them with matched hardware, and re-seals with new sweeps – checking the shower pan waterproofing while the wall is open.
Mr-Glass Parts & Our Repair-vs-Replace Approach
Parts choice drives how long a fix lasts. We use OEM Mr-Glass hardware – hinges, handles, sweeps, rollers, clips – where the original series is still supported, because aftermarket hinges rarely match the hole pattern or the glass thickness, and a mismatch shows up as a door that binds within months. For discontinued series, quality aftermarket stainless hardware and new tempered panels are usually the right call.
Then we decide repair versus replace on evidence, not on what’s easiest to sell. When only the seals and rollers are failing, we reseal and rehang. That’s the common case on bypass doors and on frameless enclosures with sound glass and solid blocking. When the tempered glass or the hinge pattern itself is compromised – a chip at the hinge edge, a drilled hole that’s cracked out, a series with no matching hardware – we replace the enclosure rather than chase parts that won’t fit right.
The decision rule is simple: if the glass and its mounting points are sound, the enclosure stays. If either is compromised, it goes. Call (833) 620-7367 and we’ll tell you which side of that line your Mr-Glass shower sits on – estimates are free.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We look at the door reveal, hinge points, curb, and sweeps, then check whether the wall behind the glass has real blocking. On conversions we check the pan and the waterproofing behind the tile line, because that’s where the real cost hides.
- 2
Repair or install. We add blocking and correct plumb and level before anything hangs. Then we set panels, mount OEM Mr-Glass hinges or matched hardware, and seal with new sweeps. Custom mirrors get templated after tile and drywall, never before.
- 3
Test. We swing the door through its full arc, check it stays closed on its own, and run water to confirm the sweeps wipe and nothing tracks past the curb. A mirror gets checked for true plane and secure mounting.
- 4
Warranty. We document what was replaced and how it was installed so your Mr-Glass coverage stays clean, and we note anything that could affect a future claim.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Frisco
We handle Mr-Glass custom frameless shower enclosures in 3/8″ and 1/2″ tempered glass, including 90° and neo-angle sweeps. We service and install Mr-Glass sliding tub and shower bypass doors with framed and semi-frameless headers, plus Mr-Glass custom mirrors – vanity mirrors, backlit and LED mirrors, and wall-to-wall mirror walls. We also work on Mr-Glass window screen and solar screen fabrications and patio and pet screen doors. On the bathroom side, that pairs naturally with walk-in shower installation and tub-to-shower conversion, which is where most Frisco Mr-Glass work starts.

We Also Service These Brands
Mr-Glass is one line among many we work with. Construction Frisco handles KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, so a bathroom or kitchen project doesn’t need three separate contractors and a scheduling puzzle. If your remodel touches the shower, the vanity, and the mirror on the same wall, we can carry all of it under one plan and one point of accountability.
FAQs – Mr-Glass Construction Service in Frisco
No. We are an independent Mr-Glass service provider, not authorized by, affiliated with, or endorsed by Mr-Glass. We never claim a dealer badge or factory certification. What we offer is experienced local installation and repair with quality parts that fit your Mr-Glass equipment. Call (833) 620-7367 for a free estimate.
It’s almost always the mounting, not the glass. A dragging door that drifts open usually means the wall behind the panel was never blocked for glass, so the enclosure racks and the hinge points lose alignment. The fix is solid blocking, a plumb and level check, and rehanging or replacing the hinges with matched hardware. Call (833) 620-7367 to get it diagnosed.
Yes, and it’s one of the most common projects we quote in Frisco. The bypass doors come off, the tub opening gets framed and waterproofed properly, and a frameless enclosure goes back in its place. The waterproofing behind the new shower line is the part that matters most, so it gets checked before the glass goes up. Call (833) 620-7367 – estimates are free.
It’s UV and heat breaking down the clear vinyl. The sweeps harden and turn amber within a few summers, and once they stiffen they stop wiping the glass, so water tracks past the curb and into the flooring beside the shower. New sweeps are a simple, low-cost fix when caught early. Call (833) 620-7367 to have yours replaced before the floor shows damage.
It should be templated after tile and drywall are finished, not off the rough opening. Measuring early leaves a reveal that can’t be shimmed without moving the panel, and no amount of silicone hides that gap. We template at finish and check the wall for true plane before the mirror is cut. Call (833) 620-7367 to schedule the measurement.
Often just the door panel, not the whole enclosure. A chip on tempered glass at the hinge edge is a failure point and can’t be repaired, but if the fixed panels and hardware are sound, only the door gets replaced. We check the hinge pattern and the series support before quoting. Call (833) 620-7367 for an exact quote – estimates are free.
Not when the work follows the manufacturer’s install guidance, which is how we approach it. Drilling, cutting, or re-hanging glass outside that guidance is what puts a claim at risk. We document what was replaced and flag anything that could affect coverage before we start. Call (833) 620-7367 to talk it through.
Typical estimated ranges for Mr-Glass work in Frisco are below. These are estimates, and the written estimate sets the final price.
| Mr-Glass Service | Typical Estimated Cost |
|---|---|
| Frameless Glass Shower Enclosure | $4500 – $12000 |
| Walk-In Shower Installation | $4500 – $12000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Shower Replacement | $3000 – $8500 |
What moves the number is blocking work, panel count, glass thickness, and whether the pan and waterproofing need attention. Call (833) 620-7367 for a written, line-item quote – estimates are free.
Book Your Mr-Glass Service in Frisco, TX
Whether your Mr-Glass shower door is dragging, your sweeps have gone amber, or you’re converting a tub to a walk-in, we can tell you what it needs and what it costs. Licensed and insured, with free written estimates and technician experience of up to 11 years. Call (833) 620-7367. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Frisco.