Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Frisco Homeowners Choose CWS Construction
We provide independent CWS construction service in Frisco, TX, repairing and installing the CWS cabinets, quartz tops and vanity lines that show up in a large share of this city’s kitchen and bath projects. What makes our CWS work different is pattern recognition: our technicians have up to 11 years of experience watching which CWS door styles, finishes and slabs hold up in North Texas heat and which fail first. We’re an independent service provider, not authorized, sponsored or warranty-backed by CWS, and we work with KraftMaid, Cambria, Silestone and Kohler as well. Call (833) 620-7367 for a free estimate.

Why Trust Construction Frisco for Your CWS Construction?
CWS – Cabinet Works & Surfaces – is a Texas cabinet and surfacing fabricator whose dealer network supplies many Frisco kitchen and bath builds. That means an independent installer here sees the same product families again and again: Shaker-style painted maple and MDF doors, marble-look and solid white quartz slabs, thermofoil doors and drawer fronts, and bath vanity cabinets with integrated quartz or cultured tops.
Familiarity matters most at the failure points. We know where thermofoil peels, why painted stiles and rails crack at the joint, and what a quartz edge does when the install skipped a full sub-top. We repair and install CWS equipment with quality parts that fit it, and we plan each job so the work doesn’t compromise the surrounding cabinetry. We’re not a CWS dealer and we don’t claim factory training. What we bring is a repair decision made by technicians who have read this product’s failure modes hundreds of times, and a written estimate before anything comes apart.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Frisco
Most CWS calls in Frisco trace back to heat, steam, humidity cycling or missing support. Here’s what we see and why it happens:
- Thermofoil delaminating along routed edges. Rigid vinyl-wrapped doors and drawer fronts lift and curl where the face wraps the core, and it shows up fastest on doors beside the range or dishwasher. Steam and radiant heat soften the adhesive bond at the edge, then the wrap catches on a towel or fingernail and peels back.
- Hairline cracks at stile-and-rail joints on painted maple and MDF. North Texas humidity swings hard between wet springs and dry summers. Wood and MDF move with it, and the joint between the stile and rail takes the stress until the paint film splits along the seam. It’s cosmetic at first and structural later.
- Quartz seams and chipped edges at sink cutouts and overhang corners. A quartz slab needs continuous support, and a sink cutout or an island overhang is where that support is hardest to build. When the sub-top is short or the overhang runs past its corbel, stress concentrates at the seam and the edge, and a dropped pan or a leaned-on corner chips it.
- Soft-close hinges and glides loosening from the box. Frameless panel fasteners get over-driven during assembly, and the screw hole gives way over time. The door sags, the reveal goes crooked, and the glide drags instead of tracking.
- Water damage at toe kicks and sink bases. A slow supply leak or a dishwasher drip finds the particleboard core at the bottom of the box. The panel swells and the finish blisters. By the time it’s visible at the toe kick, the base has usually been wet for months.
CWS Parts & Our Repair-vs-Replace Approach
We choose parts by what the homeowner will actually see and use. Where a matched look matters, we source CWS doors, drawer fronts, hinges and touch-up finish so a repair blends into the run. For boxes and hardware that will be hidden behind a closed door anyway, quality aftermarket soft-close hinges and full-extension glides perform comparably at lower cost.
The repair-or-replace call gets stated plainly. One peeling door near the range is a repair. Delamination or joint cracking that has spread across more than a few fronts usually means refacing or full replacement wins on cost per year of service, and we’ll tell you that even when a smaller ticket is available. We don’t stock OEM or genuine CWS parts, and we aren’t authorized by CWS to perform warranty work. Call (833) 620-7367 for a free estimate and a straight answer.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We open doors and drawers and check the box, the fasteners and the sub-top, not just the visible face. We photograph the affected fronts and note where the damage starts, because thermofoil peeling at the top edge and peeling at the bottom edge point to different causes.
- 2
Repair or install. Fronts come off, the countertop gets reset on a proper sub-top if it’s under-supported, and new or refaced panels go on with the finish matched to the existing run. Hinges get adjusted so the reveals line up across the whole row.
- 3
Test. Every door and drawer gets cycled. We check soft-close travel, glide extension, seam alignment and water tightness at the sink base before we call it done.
- 4
Warranty. The written estimate sets the price, and our workmanship is warranted in writing. Any CWS product warranty stays between you and CWS; we can document the work so your claim record is clean.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Frisco
We work across the CWS lines that dominate Frisco kitchens and baths: Shaker-style painted maple and MDF cabinet doors, thermofoil doors and drawer fronts, and quartz countertops in marble-look and solid white. On the bath side, we service and install vanity cabinets with integrated quartz or cultured tops. We handle cabinet installation and refacing, quartz and granite countertops, and small and partial kitchen remodels. A typical call involves CWS thermofoil or painted doors that have started peeling or cracking at the edges within a few years of installation, often paired with a quartz top chipped near the sink. The usual cause is heat and moisture exposure plus insufficient support under the counter overhang. A qualified local pro documents the door faces and box condition, replaces the affected fronts, resets the top on a proper sub-top, and re-hangs doors with adjusted hinges so the reveals line up.
We Also Service These Brands
CWS is one line among many in Frisco. We also work with KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures. If your kitchen mixes a CWS cabinet run with a Cambria island top or Kohler faucetry, that’s a normal scope for us rather than a handoff to a second contractor.
FAQs – CWS Construction Service in Frisco
No. We are an independent service provider and have no affiliation, authorization, sponsorship or warranty backing from CWS. We repair, install and service CWS cabinets and surfaces with quality parts that fit them. Call (833) 620-7367 for a free estimate.

Usually they can be repaired if the peel is confined to a few doors; widespread delamination means new fronts. Peeling at the corners is the classic thermofoil failure, and it starts where heat and steam concentrate – next to the range, above the dishwasher. A single door can often be replaced or re-wrapped. Once the peel has reached most of the run, replacing the fronts is the better spend. Call (833) 620-7367 and we’ll tell you which side of that line your kitchen is on.
It can, if the overhang runs past what the slab and its support can carry. Quartz is strong in compression but brittle at an unsupported edge, and an island overhang with no corbel or hidden bracket concentrates stress at the corner. We check the sub-top and bracket the overhang before a top gets reset, so the edge holds. Call (833) 620-7367 to have yours looked at.
Often yes, because the painted Shaker and thermofoil styles stay in circulation through the dealer network and finish matching is straightforward on solid colors. Sun exposure shifts the tone of an older finish, so expect a close match rather than a perfect one on a door that sits in a bright run. Call (833) 620-7367 and we’ll talk through the match before you commit.
Yes, and it’s a point most installers skip. Frisco sits on expansive black clay that swells through wet springs and shrinks in drought summers, so a slab can move. We check the floor plane before setting base cabinets and shim and scribe to the actual slab rather than assuming it’s flat. On the newer north and west subdivisions, where builder grading has left drainage marginal, that check matters more.
Refacing typically lands well below replacement because the boxes stay; full cabinet replacement runs higher once boxes, fronts and hardware are all new. Here are typical estimated ranges for the related work, and the written estimate sets the final price:
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Backsplash Installation | $800 – $2,500 |
Call (833) 620-7367 for an exact quote – estimates are free.
A door or hinge repair is often a single visit; a reface or countertop reset typically runs a few days depending on how many fronts are involved. We give you the timeline in the written estimate before work starts. Call (833) 620-7367 to schedule.
CWS painted maple and MDF Shaker cabinets, thermofoil doors and drawer fronts, quartz countertops, and bath vanity cabinets with integrated quartz or cultured tops. Call (833) 620-7367 to confirm your specific product.
Repair by an independent provider doesn’t automatically void a manufacturer warranty, but CWS sets its own terms and you should read them. We document what we do so your claim record stays clean. Call (833) 620-7367 with questions.
Book Your CWS Service in Frisco, TX
If your CWS cabinets are peeling, cracking or sitting under a chipped quartz top, we can tell you what’s repairable and what needs replacing, with a written line-item estimate before anything comes apart. Call (833) 620-7367. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Frisco.