Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Frisco Homeowners Choose PGT Construction
We provide independent PGT construction service in Frisco, TX, repairing and installing PGT aluminum and vinyl window and door systems with quality parts that fit them. What sets our PGT work apart is diagnosis: we identify why a unit is fogging, sticking or leaking before we recommend a fix, so you’re not sold a full replacement when a glass unit and new seals will do the job. Our technicians have up to 11 years of experience with these systems, and we’re an independent provider – not affiliated with or authorized by PGT. Call (833) 620-7367 for a free estimate.

Frisco is one of the fastest-growing large cities in the US, and almost none of its housing stock predates the 1990s. The bulk went up in the 2000s to 2020s boom, which means most of the PGT product here sits in builder-era subdivisions still being finished around the homeowner. That shapes the work. We’re usually dealing with warranty-era windows and doors on production homes rather than renovated older units, and we plan every service call around that reality.
Why Trust Construction Frisco for Your PGT Construction?
PGT builds aluminum and vinyl window and door systems, and those two frame materials age in very different ways. Aluminum is rigid and holds its shape but conducts temperature, so hardware and joints get more attention. Vinyl is a better insulator but moves and discolors under long Texas sun. Knowing which failure you’re looking at – and which one a symptom actually points to – is most of the job. Our technicians have up to 11 years of experience reading exactly that.
We repair and service PGT equipment with quality parts that fit it. That means we source glass units and locking mechanisms to match the system rather than forcing a generic part, and we evaluate weatherstripping and sealants on their own merits. We don’t stock OEM or genuine PGT parts, we’re not a PGT dealer, and we don’t describe our work as sales and service. We’re an independent shop, and we say so plainly.
What that independence buys you is warranty-safe practice. We follow procedures that keep your existing coverage intact where it applies, and we tell you upfront when a repair could affect a claim so you can decide with your eyes open. Licensed and insured, written estimates, and a clear line between what we recommend and what PGT’s own warranty covers.
That accountability matters in Frisco, where new homes are still under builder warranty and owners don’t want a service call to complicate a claim. We work alongside those warranties instead of around them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Frisco
PGT products are built well, but every window and door system shows predictable wear. These are the issues we see most in Frisco homes, and what’s usually behind them.
- Fogging or condensation between panes. A sealed insulated glass unit has failed when moisture appears inside the glass. It’s the single most common PGT issue we’re called for, and it’s a glass-unit problem, not a frame problem, so the frame usually stays. The fix is typically a custom replacement unit installed with fresh seals.
- Vinyl frame warping or discoloration. Prolonged UV exposure is hard on vinyl, and North Texas delivers plenty of it. Frames can bow slightly or take on a chalky cast, which throws off weather sealing and looks tired. When the warp is minor, hardware and seal adjustment restores function; when it’s structural, we talk about replacement honestly.
- Aluminum frame corrosion and pitting. Aluminum frames and hardware can pit in humid conditions, and pitted hardware makes windows stiff and locks unreliable. Cleaning and hardware replacement often solves it before the frame itself is compromised.
- Water infiltration at weatherstripping and sealant joints. Worn weatherstripping and failed sealant joints let water in, especially after the hail and straight-line wind events that roll through this region. Left alone, that moisture reaches interior finishes. Resealing and replacing weatherstripping is a straightforward repair when it’s caught early.
- Sticking operation and hard-locking units. Windows that fight you usually have a hardware, alignment or seal issue rather than a failed unit. Adjusting and replacing the right component brings them back to smooth operation without replacing glass that’s still sound.
The pattern worth knowing: in Frisco, a fogging window and a leaking roofline often trace back to the same storm. Because so much of the housing here is new, one weather event can leave several systems showing wear at once. That’s a reason to look at windows, doors and roof together rather than treating each in isolation.
PGT Parts & Our Repair-vs-Replace Approach
Parts decisions drive the outcome more than most homeowners expect. For critical components – glass units and locking mechanisms especially – we recommend OEM parts so the system performs as designed and warranty validity stays intact where it applies. For weatherstripping and sealants, a high-quality aftermarket alternative can be cost-effective without sacrificing performance. We don’t stock OEM or genuine PGT parts; we source what fits the specific unit in front of us.
Repair versus replacement comes down to age and condition. A single failed glass unit in an otherwise sound frame is a repair. Widespread frame warping, repeated seal failure across a wall of units, or pitting that’s reached the frame structure points toward replacement, and impact-rated options may make more sense there if you’re weighing storm protection. We lay out both paths with written estimates so you’re choosing, not being pushed.
Call (833) 620-7367 for a free estimate and a straight answer on which path fits your PGT windows.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the unit and confirm what’s actually wrong – failed IGU seal, worn weatherstripping, pitted hardware or frame movement – rather than guessing from the symptom alone. Fogging, for instance, is almost always the seal, not the frame.
- 2
Repair or install. For a glass-unit failure, we measure the unit for a custom replacement IGU and install it with new seals. For hardware or weatherstripping, we fit quality parts that match the system. For full window replacement or impact window installation, we set the unit and seal it correctly for North Texas weather.
- 3
Test. We operate every window and door through its full range, check locking and latching, and confirm the seals are tight. You see the unit work before we leave.
- 4
Warranty and documentation. We explain what the repair covers, how it interacts with any existing PGT warranty, and what to watch for. If frame damage turned up during service, we tell you then, not later.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Frisco
We service and install PGT aluminum and vinyl window and door systems, including impact-resistant glass options. That covers the spectrum most Frisco owners actually have: production-home vinyl windows, aluminum-framed units, and impact-rated windows where storm protection is the priority. We handle window replacement, impact window installation, and the roof repair that so often follows the same storm that stressed your windows and doors.
We don’t name model lines or series as a sales hook, because what matters is what’s on your house. If you’re unsure what you have, we’ll identify it during the estimate and tell you plainly what it can and can’t do.
We Also Service These Brands
PGT is one focus, not our only one. We also work with KraftMaid and Wellborn cabinetry, Cambria, Silestone and Caesarstone surfaces, and fixtures from Kohler, Moen, Delta, Grohe, Toto and American Standard. For windows and doors, we service and install PGT alongside CGI, Therma-Tru and ECO Window Systems, matched to your home’s structural and weather demands. When a project touches several trades, that breadth means one point of contact.
FAQs – PGT Construction Service in Frisco
No. We’re an independent PGT service provider, not affiliated with or authorized by PGT. Our expertise comes from hands-on work with these systems, not a manufacturer relationship. Our technicians have up to 11 years of experience, and we service PGT with quality parts that fit. Call (833) 620-7367 for a free estimate.
Yes. We recommend OEM parts for critical components like glass units and locking mechanisms, and high-quality alternatives for weatherstripping and sealants. We don’t stock OEM or genuine PGT parts; we source what fits your specific unit. Call (833) 620-7367 to talk through your window.
Most single-unit repairs, including a glass replacement, are handled in a single visit once parts are in hand. Full window replacement or a multi-unit job takes longer, and we give you a clear timeline in the written estimate. Call (833) 620-7367 for a free estimate and a realistic schedule.
We cover PGT aluminum and vinyl window and door systems, including impact-resistant windows. That spans window replacement, impact window installation, and related roof repair. Call (833) 620-7367 to confirm your unit is one we service.
Not when the work is done correctly. We use warranty-safe practices and explain how a repair interacts with your existing coverage before we start. If a repair could affect a claim, we tell you upfront. Call (833) 620-7367 with your warranty questions.
Typical estimated ranges for Frisco, with the written estimate setting the final price:
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Most jobs involve one or two units, not a whole-house replacement, so your number depends on what’s actually failing. Call (833) 620-7367 for an exact quote – estimates are free.
In most cases you can replace just the glass. If the frame is sound and only the sealed glass unit has failed, a custom replacement IGU restores clarity and energy efficiency without a full window. If frame damage is present, we’ll advise full replacement. Call (833) 620-7367 for a free estimate.
Yes, it’s common, and it’s usually hardware, alignment or seal wear rather than a failed unit. Adjusting and replacing the right component often brings operation back to smooth. Call (833) 620-7367 and we’ll diagnose it.
Impact-resistant glass carries a permanent marking etched in the corner of the glass itself, and the frame or original paperwork may confirm it. If you can’t find the marking, we can identify it during a visit. Call (833) 620-7367 to schedule.
Condensation between the panes means the insulated glass unit’s seal has failed and moist air has entered the gap. It’s a glass-unit problem, not a frame problem, and it’s fixed by replacing the unit with new seals. Call (833) 620-7367 for a free estimate.
PGT windows aren’t inherently leak-prone; leaks usually trace to worn weatherstripping, failed sealant joints, or storm damage to the seal. Resealing and weatherstripping replacement solves most of them when caught early. Call (833) 620-7367 to have yours checked.
Book Your PGT Service in Frisco, TX
If your PGT windows are fogging, sticking or leaking after a storm, we’ll diagnose the real cause and give you a written estimate before any work starts. One contractor, every trade, from window replacement and impact window installation to the roof repair that so often comes with it. Call (833) 620-7367. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Frisco.