Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Countertop Installation Cost in Frisco?
Countertop installation in Frisco typically costs between $2,000 and $6,500 for most kitchen projects. That range covers the countertop material, fabrication, templating, and installation on a standard kitchen of 30 to 45 square feet. A single small bathroom vanity lands near the low end, while a large kitchen with a waterfall edge, an island, and a premium stone pushes toward the top.
Most Frisco homeowners we work with end up budgeting somewhere in the middle, around $3,500 to $4,500, once they factor in an undermount sink cutout and a matching backsplash. The written estimate you get after templating is what sets the final price, and there’s no charge to get one.
Key Takeaways
- Typical installed range: $2,000 – $6,500, material included.
- Fabrication and installation labor usually runs 35 – 50% of the total.
- Cambria, Silestone, and Caesarstone quartz sit mid-pack on price; natural stone runs higher.
- Free estimates, and our technicians have up to 11 years of experience with templating and install.
Countertop Installation Cost Breakdown (2026)
Here’s how the numbers break out line by line for a typical Frisco kitchen. These are estimated ranges, not a quote. Your written estimate after the on-site measure is the binding figure.
| Line Item | Typical Estimated Cost |
|---|---|
| Laminate countertop, fabricated and installed | $2,000 – $3,200 |
| Quartz countertop (Cambria, Silestone, Caesarstone), fabricated and installed | $3,200 – $5,800 |
| Natural stone countertop (granite, marble), fabricated and installed | $4,000 – $6,500 |
| Sink cutout and undermount mounting | $150 – $400 |
| Edge profile upgrade (bullnose, bevel, ogee) | $200 – $600 |
| Tear-out and haul-away of old countertop | $200 – $500 |
| Backsplash installation (paired project) | $800 – $2,500 |
| Kitchen island countertop (added to base) | $3,000 – $10,000 with island build |
What drives the number up or down? Material type is the biggest lever, and thickness matters almost as much. A 3cm slab costs more than a 2cm slab, and a waterfall edge or a mitered island takes more fabrication hours than a straight run against the wall. Cutouts for a sink or a cooktop add time. The shape of your kitchen matters too: an L-shape or U-shape with lots of inside corners means more seams and more cutting, and every seam has to be laid out and polished on site. On the low end, a straightforward straight-run laminate job stays near $2,000. On the high end, a full natural stone kitchen with an island, a waterfall edge, and a matching backsplash climbs toward $6,500 before you add the island build itself.
If you’re planning the countertop as part of a larger room refresh, it helps to see the whole picture before you commit. A full kitchen remodel in Frisco typically runs $14,000 – $45,000, and a smaller kitchen refresh lands in the $9,000 – $20,000 range. You can compare those numbers against a countertop-only project to decide whether to phase the work or do it in one pass.
What Affects Countertop Installation Pricing in Frisco
Frisco homes tend to be newer builds with open-plan kitchens, and that shapes what a countertop job actually involves here. A few factors move the price more than anything else:
- Material and slab selection. Quartz from Cambria, Silestone, or Caesarstone sits in a predictable middle band. Natural stone is priced per slab and varies with availability and pattern, so a distinctive slab can move the total noticeably.
- Square footage and seam count. Pricing follows measured square footage, and every seam is extra fabrication. A long peninsula with one clean run costs less per foot than a kitchen wrapped in short runs with multiple corners.
- Edge profile and thickness. A standard eased edge is included in most jobs. Bullnose, bevel, ogee, and mitered edges add fabrication time. A 3cm slab costs more than a 2cm slab but often needs less build-up at the edge.
- Sink and cooktop cutouts. An undermount sink needs a polished cutout and often reinforcement. A cooktop cutout and a faucet hole add smaller charges. Farmhouse sinks need more cabinet and counter work behind the apron.
- Tear-out and disposal. Removing an old countertop, disconnecting the sink, and hauling everything away adds labor. If the old counter is glued down or tiled, removal takes longer.
- Access and scheduling. A slab is heavy and awkward. A tight stairwell, a narrow entry, or a long carry from the street adds handling time. Frisco’s heat also means installers work counters in shorter, cooler windows to keep adhesive and sealant behaving properly.
One more factor specific to this part of North Texas: the region’s expansive clay soils shift with seasonal moisture, and slab foundations move with them. That’s one reason we check cabinet level and countertop support carefully during the measure. A counter that’s dead flat across a stable cabinet run lasts; one laid over a racked cabinet shows gaps and cracks at the seams. It’s a small step that saves a callback.
Quartz vs. Granite vs. Laminate: What Should You Choose?
Quartz is the most common choice in Frisco kitchens, and the installed range of $3,200 – $5,800 covers most of what homeowners pick from Cambria, Silestone, and Caesarstone. Quartz is non-porous, so it doesn’t need sealing, and it holds a consistent pattern from slab to slab, which makes a large open kitchen easier to plan. Granite runs $4,000 – $6,500 installed and gives you a one-of-a-kind slab, but it needs periodic sealing and the pattern varies, so you’re selecting an actual slab rather than a sample. Laminate at $2,000 – $3,200 is the budget option and has improved considerably, but it doesn’t carry the resale weight that stone does in this market.
Our approach is to spec the right surface for the job. We work with a curated set of manufacturers and can show you options side by side so you’re choosing based on how the counter will actually be used, not just how it photographs. If you’re pairing new counters with new cabinetry, cabinet installation in Frisco runs $4,000 – $13,000, and doing both at once usually saves on labor and scheduling.
How Long Does Countertop Installation Take?
Plan on two to three weeks from the day you approve the estimate to the day the new counter is in, with the actual install day taking about half a day to a full day. The timeline breaks down into a few stages:
- Measure and templating. We come out, confirm the layout, note cutouts and seams, and take precise measurements. This is where the written estimate gets finalized.
- Fabrication. The slab is cut, edged, and polished at the fabricator. This is the longest stage, usually one to two weeks depending on material and complexity.
- Tear-out (if scheduled). The old counter and sink come out, and the cabinets get checked and prepped.
- Installation. The counter goes in, seams are set, the sink and cooktop are mounted, and the edges are finished. Most kitchens are back in use the same evening, though sealant on natural stone needs a short cure before heavy use.
If the job is a straight swap with no cabinet changes, the whole thing can move faster. If you’re also adding an island, plan for the island build to add time before the counter template. A kitchen island installation in Frisco typically runs $3,000 – $10,000 on top of the countertop itself, depending on size and whether it includes seating, storage, or a prep sink.
How to Save on Countertop Installation
There’s real money to be found in how you plan the job, not just in which slab you pick.
- Bundle the backsplash. Installing the backsplash at the same time as the counter means one mobilization and one set of cutouts. Backsplash installation in Frisco runs $800 – $2,500, and doing it alongside the counter keeps you at the low end of that band.
- Stay with a standard edge. A standard eased edge is already included in most jobs. Upgrading to a bevel or ogee adds $200 – $600 for a detail most people stop noticing within a month.
- Choose a slab with a simple layout. Fewer seams means less fabrication time. If your kitchen is an L or U shape, ask about laying out the seams where they’re least visible rather than forcing a pattern that creates extra cuts.
- Schluter waterproofing where it counts. Around a sink and a backsplash, proper waterproofing behind the surface protects the substrate. It’s a modest add that prevents a much bigger repair later.
- Get the estimate before you buy the slab. The measure and estimate are free. Knowing the fabrication cost for your exact layout before you commit to a material keeps you from falling for a slab that pushes the install budget over.
When you’re ready to price your specific kitchen, call (833) 620-7367. The estimate is free and the written number is what you’ll be held to.
Should You Repair or Replace a Countertop?
Replace it. Patching a cracked or delaminated counter rarely holds on a working kitchen surface, and the repair cost is a large fraction of a new install. A single seam or chip repair runs a few hundred dollars, but once a counter is cracked through, or the laminate has lifted at a seam, the fix is temporary. If the cabinet boxes underneath are sound, a new countertop is a clean swap. If the cabinets are sagging or water-damaged, replacing the counter without addressing the boxes is money wasted, which is where scheduling cabinet work alongside the counter pays off.
Do I Need a Permit for Countertop Installation in Frisco?
Usually not for a straight countertop replacement. A like-for-like swap of a counter and sink doesn’t typically require a permit. Projects that move plumbing, add a sink in a new location, or change gas to a cooktop may cross into work that needs one. Because rules can vary, confirm with the City of Frisco’s building department before work starts. We’ll flag anything in your project that might need a permit when we measure, so there are no surprises.
FAQs – Countertop Installation Cost
How much does countertop installation cost in Frisco?
Countertop installation in Frisco typically costs $2,000 – $6,500, all-in with material and labor for a standard kitchen. A small vanity lands near $2,000, and a large kitchen with natural stone and a waterfall edge sits near $6,500. For an exact figure on your kitchen, call (833) 620-7367 and we’ll set up a free estimate.
Is quartz or granite cheaper to install?
Quartz is usually cheaper, at $3,200 – $5,800 installed versus $4,000 – $6,500 for natural stone. Quartz also saves on upkeep because it doesn’t need sealing. Call (833) 620-7367 to compare specific slabs and get a written estimate.
Can you template and install a countertop the same day?
No, and be wary of anyone who says otherwise. Templating has to happen before fabrication, and fabrication usually takes one to two weeks. Installation itself is a half-day to a full-day job. We’ll give you a realistic timeline in your free estimate – call (833) 620-7367.
How much does a kitchen island countertop add?
Adding an island countertop on top of a base kitchen runs $3,000 – $10,000 installed when the island build is included, depending on size, seating, and whether it has a prep sink. A larger kitchen remodel that includes the island, counters, and cabinetry typically runs $14,000 – $45,000. Call (833) 620-7367 for a bundled estimate.
Do you offer free estimates on countertop installation in Frisco?
Yes, the estimate is free, including the on-site measure that sets your final price. Call (833) 620-7367. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
One Contractor, Every Trade for Your Frisco Kitchen
A countertop is rarely the only thing on the list. Most of the Frisco kitchens we see need new counters plus something else: cabinetry, a backsplash, sometimes a window over the sink or a door to a new patio. That’s where working with a contractor who covers seven trades under one contract saves you time and coordination. We handle roofing, windows and doors, kitchen remodeling, bathroom remodeling, home additions and ADUs, fence installation, and driveway and pavers. You don’t have to stitch together four different contractors for one project.
The same goes for materials. We work with more than 50 vetted manufacturer brands, so you’re choosing from real options instead of whatever happens to be in stock. For surfaces that means Cambria, Silestone, and Caesarstone. For cabinetry, KraftMaid and Wellborn. For fixtures, Kohler, Moen, Delta, Grohe, Toto, and American Standard. If your kitchen refresh extends to the exterior, there’s James Hardie fiber cement siding for durability and Schluter waterproofing systems behind wet surfaces, specified by builders who plan for the long haul. You can see the full scope of what we do on our Construction Frisco page.
Our technicians have up to 11 years of experience with templating, fabrication coordination, and installation, and every project runs through one point of accountability from estimate to final walkthrough. That’s the difference between a counter that’s dropped off and a counter that’s planned.
Ready to Price Your Countertop?
If you’re weighing quartz against stone, wondering whether to add an island, or planning a full kitchen refresh, the fastest way to get a real number is a free estimate. Call (833) 620-7367. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Tell us the size of your kitchen and what you’re considering, and we’ll come out, measure, and put the price in writing. No pressure, no upselling – just a clear number so you can decide.
Pricing reflects the Frisco market as of 2026. Construction Frisco offers free estimates – call (833) 620-7367.
Written by the team at Construction Frisco.
What Our Customers Say
"Ground up build. Permits, foundation, framing, all of it, and he ran the schedule tightly enough that the subs were never tripping over each other. Finished within a month of a fourteen month estimate."
- Amanda Norris"The framing was meticulous and the walls are straight everywhere. Drywall goes on a lot better when the framing is right."
- Sami Hassan"The foundation survey came back dead on. Everything downstream of that being square is the reason the rest of the build went smoothly."
- Renee Sutton