Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Kitchen Remodel Cost in Frisco?
A kitchen remodel in Frisco typically costs $14,000 to $45,000, with most projects landing in that band depending on scope, cabinet quality and how much of the layout changes. A smaller kitchen with refreshed cabinets and counters usually runs $9,000 to $20,000, while a fuller renovation with new cabinetry, stone surfaces and an island sits at the higher end. The written estimate sets the final price, and we provide that estimate for free.
That spread is wide because “kitchen remodel” covers a lot of ground. Replacing cabinet doors and adding a backsplash is a different job from taking the kitchen down to the studs, moving the sink, and rebuilding around a new island. The numbers below break the work into line items so you can see where your budget actually goes in the Frisco market.
Kitchen Remodel Cost Breakdown (2026)
Here are the typical estimated ranges we work with for kitchen projects in Frisco. Every line is priced per job from a written estimate, so treat these as planning numbers rather than a quote for your specific kitchen.
| Line item | Typical estimated range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What pushes a Frisco kitchen toward the top of the full-remodel range? Layout changes are the biggest lever. Moving plumbing or a gas line, relocating a wall, or adding a window where there wasn’t one all add cost because they pull in trades beyond the cabinets and counters. Cabinet grade matters almost as much: painted MDF doors and a semi-custom box sit at one end, while full-wood, soft-close KraftMaid or Wellborn cabinetry with custom sizing sits at the other. Countertop material swings the number too. A quartz surface from Cambria, Silestone or Caesarstone costs more than a laminate top but holds up to daily cooking and resists staining in a way that laminate won’t.
What keeps a project at the lower end? Keeping the plumbing where it is. Reusing the cabinet boxes and replacing only doors and hardware. Choosing a standard-depth countertop instead of a thick waterfall edge. Skipping a demo that exposes surprise framing. The honest reality is that a kitchen rarely reveals its full cost until it’s opened up, which is why the written estimate should spell out what’s included and what gets handled if something unexpected turns up behind the drywall.
What Affects Kitchen Remodel Pricing in Frisco
Frisco kitchens tend to be generous in size, and a lot of the homes here were built in the same broad waves of development. That shapes pricing in ways a national cost calculator won’t capture. Here’s what actually moves the number.
- Kitchen size and open-plan layout. Many Frisco homes open the kitchen straight into a living or dining area, which means a remodel often touches flooring, lighting and wall finishes in the adjoining room. A larger footprint means more cabinetry, more counter run and more labor, so square footage is the first thing that shifts the estimate.
- Cabinet grade and door style. Cabinetry is usually the single largest line on a kitchen estimate. Stock, semi-custom and fully custom boxes carry very different prices, and door style, finish, drawer hardware and interior organizers all add to it. This is where homeowners make the biggest trade-off between budget and longevity.
- Countertop material. Natural and engineered stone cost more than laminate or solid surface, but they resist heat, staining and daily wear. Choosing a slab for the perimeter and a matching remnant for an island is a common way to get the look without paying slab price on every inch.
- Layout and utility changes. Moving a sink, range or refrigerator involves plumbing and electrical work, sometimes gas. Homes built in certain years may have a vent hood that ducts to the exterior and others that recirculate, and the change affects the plan. Any electrical or gas work needs to be done by a licensed professional, and most cities require a permit when you move these, so confirm the rules with Frisco’s building department before work starts.
- Frisco summers and heat load. A kitchen on a west- or south-facing wall takes real afternoon sun through DFW summers, which pushes the space warmer near the cooking zone. That’s a reason homeowners choose window treatments, exterior shade or upgraded glazing during a remodel, and it feeds into the budget if window or door replacement joins the project.
- Permits and inspection timing. Structural changes, utility relocations and adding an island with plumbing or power usually require a permit. Permit cost and scheduling review time vary by scope, and a realistic estimate accounts for both. We’ll tell you what needs a permit and help you plan the timeline around it.
One more thing weighs on price in a way that’s easy to overlook: doing several rooms at once. When a kitchen remodel overlaps with bathroom updates or a flooring change through the house, one crew can sequence the work and you avoid paying twice for mobilization, protection and clean-up. That’s the practical argument for handling a broader upgrade under one contract rather than lining up separate contractors for each room. As a contractor that covers seven trades, we can put the kitchen and the surrounding work on one schedule and one point of accountability.
How to Save on Kitchen Remodel
You don’t have to spend at the top of the range to get a kitchen that feels new and works well. Some of the most effective savings come from decisions made before demolition, not during it.
- Keep the plumbing and gas lines where they are. A sink or range that stays put avoids the plumbing, electrical and permit work that comes with relocation. You still get new cabinets, counters and finishes, which is where most of the visible improvement lives.
- Reface or replace doors instead of rebuilding boxes. If your cabinet frames are solid and square, new doors, drawer fronts and hardware can transform the kitchen for a fraction of full cabinetry. This approach often fits comfortably in the $4,000 to $13,000 cabinet range.
- Choose your counters by zone. Put the premium stone where you prep and cook, and use a more economical surface or a remnant on less-used areas. A perimeter-and-island split is a common way to balance cost and durability.
- Bundle related work. If you know the bathroom, flooring or windows need attention soon, handling them alongside the kitchen lets one sequence cover it all. Bundling isn’t a discount program; it’s a way to reduce the duplication of labor, protection and clean-up across jobs.
- Get a written, line-item estimate before you commit. A clear estimate shows you exactly what you’re paying for, so you can prioritize the items that matter most and drop what doesn’t. Our estimates are free, so call (833) 620-7367 and we’ll walk your kitchen and put the numbers in writing.
What Does a Kitchen Remodel Include?
A typical Frisco kitchen remodel covers the cabinets, countertops, backsplash, sink and faucet, and often the island. Cabinets anchor the project, running $4,000 to $13,000 depending on grade and size, followed by countertops at $2,000 to $6,500 and a backsplash at $800 to $2,500. An island adds $3,000 to $10,000 if the layout includes one. Flooring, lighting, paint, plumbing fixtures and appliance swaps can be folded in as you go, and each is priced separately so you can see the effect on the total.
The trickiest part of a kitchen is not any one trade; it’s the sequencing. Cabinet install has to happen before countertops are templated. Countertop templating has to happen after cabinets are set and level. Backsplash goes in after the counters are in place. Plumbing and electrical rough-in happens at the start and final connections happen at the end. When those phases are managed by separate contractors, scheduling gaps and finger-pointing eat the calendar. With one team owning the sequence, the kitchen comes together in a predictable order, and you have a single call when something needs attention. That’s the reasoning behind our approach: construction frisco handles the trades a whole-house project needs, so a kitchen and the surrounding rooms stay on one timeline.
Fixtures and finishes worth planning together
Small decisions add up in a kitchen, and the fixtures are where a coordinated plan shows. Faucets from Moen, Delta, Grohe or Kohler can be matched to the sink, filtered-water tap and pot filler so the metals and finishes line up. Lighting, outlets and the range hood are decided at the same time as the cabinet layout, not after. Getting the finish family consistent across the faucet, cabinet hardware and lighting avoids the fragmented look that comes from buying each item on impulse. The material brands we spec – KraftMaid and Wellborn for cabinetry, Cambria, Silestone and Caesarstone for surfaces – give a range of price points within one design language, so the kitchen reads as one built space rather than a collection of separately purchased pieces.
When to bring the rest of the house in
If the plan already includes a larger change to the home, a kitchen remodel is often a natural starting point but not the only piece. Adding a room or extending the living area can be coordinated with the kitchen work so the schedules line up. We manage home additions and ADUs alongside kitchen and bathroom remodeling, in both traditional site-built construction and prefab formats, so the decision about how to build is yours to weigh before work begins. If your project is broader than the kitchen, it’s worth having that conversation early rather than mid-renovation.
FAQs – Kitchen Remodel Cost
How much does a kitchen remodel cost in Frisco in 2026?
A kitchen remodel in Frisco typically costs $14,000 to $45,000, with smaller projects starting around $9,000. The final number depends on cabinet grade, countertop material, layout changes and how much of the surrounding room is included. Call (833) 620-7367 for a free written estimate that puts your kitchen’s numbers in writing.
Is it cheaper to remodel a small kitchen or a large one?
A small kitchen remodel runs $9,000 to $20,000, which is meaningfully less than a full renovation at $14,000 to $45,000. The savings come from fewer cabinets, less counter run and often fewer layout changes. Even in a compact kitchen, cabinet installation at $4,000 to $13,000 is usually the largest single line. Call (833) 620-7367 to price your space.
How much does cabinet installation cost in Frisco?
Cabinet installation in Frisco typically runs $4,000 to $13,000 for a kitchen. The range reflects cabinet grade and size: semi-custom KraftMaid or Wellborn cabinetry with soft-close hardware sits at the higher end, while refacing existing boxes or standard stock cabinets sit lower. We’ll spec the right brand and grade for your kitchen and put it in a written estimate. Call (833) 620-7367, estimates are free.
Can I add an island or change the layout during a remodel?
An island installation typically costs $3,000 to $10,000, and changing the layout is common in Frisco kitchens. Moving plumbing, gas or electrical lines adds cost and usually requires a permit, so confirm with the city’s building department before work starts. All utility work is done by licensed professionals. Call (833) 620-7367 to discuss what your layout can support.
Is it cheaper to repair or replace the kitchen cabinets?
Replacing cabinet doors and fronts is usually cheaper than rebuilding the boxes, and it can land well within the $4,000 to $13,000 cabinet range if frames are solid. Full cabinet replacement makes more sense when the boxes are out of square, damaged or the layout needs to change. Either way, an in-person estimate will tell you which path fits your kitchen. Call (833) 620-7367.
Can you start a kitchen remodel soon?
We can give you a free estimate on your kitchen and get the project scheduled without delay, with fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7, and the phones don’t close. Call (833) 620-7367 to get on the schedule. The written estimate sets the final price.
Why homeowners handle the whole project with one contractor
Remodeling a kitchen and then chasing a separate installer, a countertop fabricator, a plumber and an electrician on different schedules is the part homeowners remember least fondly. Our technicians have up to 11 years of experience, and we carry seven trades under one contract: kitchen, bathroom, roofing, windows and doors, home additions and ADUs, fencing, and driveway and pavers. That means one point of contact from estimate through final walkthrough, and material choices that pull from more than 50 manufacturer brands across cabinetry, surfaces, fixtures, roofing, windows and hardscaping. Choose your material and we’ll make it work.
Call (833) 620-7367. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, pricing is upfront, and the written estimate is what sets the final price. If you’re planning a Frisco kitchen renovation in 2026, the most useful first step is a walkthrough and a clear number, so let’s get that scheduled.
Pricing reflects the Frisco market as of 2026. Construction Frisco offers free estimates – call (833) 620-7367.
Written by the team at Construction Frisco.
What Our Customers Say
"Ground up build. Permits, foundation, framing, all of it, and he ran the schedule tightly enough that the subs were never tripping over each other. Finished within a month of a fourteen month estimate."
- Amanda Norris"The framing was meticulous and the walls are straight everywhere. Drywall goes on a lot better when the framing is right."
- Sami Hassan"The foundation survey came back dead on. Everything downstream of that being square is the reason the rest of the build went smoothly."
- Renee Sutton