Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Frisco
If your fence in Frisco is leaning at the posts, missing pickets, or just due for a replacement, we install and repair wood, vinyl, chain link, and aluminum fencing built for North Texas conditions. Frisco lots are tight, the soil moves, and the utility lines under these newer yards aren’t always where the plat says they are, so a fence here is a permit-and-locate job, not a quick post-hole afternoon. Call (833) 620-7367 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Frisco Homeowners Call Construction Frisco for Fence Installation
Frisco rewards a contractor who understands how these subdivisions actually got built. Almost none of the housing stock here predates the 1990s, and the bulk of it went up during the 2000s through 2020s boom. That changes the work. We aren’t usually replacing a century-old fence; we’re working on builder-warranty-era lots in neighborhoods still being finished around you, and on the last big parcels on the north and west edges as they get platted.
That history matters because the original builder fences on these lots were often set on expansive black clay with minimal drainage grading. A fence that looked fine at closing can rack and lean within a few seasons once the clay swells through wet springs and shrinks in drought summers. We plan post depth and drainage around that reality instead of repeating the original mistake.
We also know the utility problem firsthand. In the newer northern subdivisions, freshly buried irrigation, pool, and data lines routinely turn up where the drawings say they aren’t. We call for locates before any digging and spell out line-protection allowances in writing, so a surprise doesn’t become your invoice.
Our technicians have up to 11 years of experience, and we bring seven trades under one contract, so a fence project can sit alongside roofing, windows, or a driveway upgrade without you stitching together three separate contractors. Licensed & insured, free estimates, written line-item quotes, and a workmanship warranty on the installation.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Frisco
We handle the full range of residential and light commercial fencing, from a simple privacy replacement to a full perimeter build on a greenfield lot. Here’s how the main options play out on Frisco ground.
Wood Fence Installation in Frisco
Wood is still the default privacy fence in most Frisco subdivisions, and it’s the material we replace most often. On these lots the original builder-grade cedar or pine is frequently failing at the posts within a decade because the black clay moves. We set posts deeper and with better drainage than the original, and we’ll talk through a gravel or concrete mow strip to keep the base dry. A written quote covers post spacing, depth, and any allowance for line protection before the first hole is dug.

Privacy Fence Installation in Frisco
Tight-lot subdivisions mean privacy fencing has to work within shared property lines and HOA expectations. We set the fence line to your survey, keep the height within what your neighborhood allows, and stage materials so they don’t spill onto a neighbor’s driveway. If your lot sits close to the next one, we plan access before the delivery truck arrives.

Fence Repair in Frisco
Not every Frisco fence needs replacing. Racked panels, heaved posts, storm-damaged sections, and gates that no longer latch are all fixable, and repair is often the smarter call on a fence that’s still mostly sound. We diagnose whether the failure is the post, the soil, or the panel, and quote the fix line by line so you can see what’s worth saving.

Vinyl, Aluminum, and Chain Link Fence Installation in Frisco
For homeowners who want low maintenance, vinyl and aluminum hold up well against North Texas sun and the occasional hail-and-wind event. Vinyl gives a clean privacy line without annual staining; aluminum and iron-style panels suit front-yard and pool enclosures where visibility matters. Chain link remains the practical choice for side yards and light commercial lots. Whatever the material, the post foundation is the part that decides whether the fence stands straight in ten years, so we treat the dig as the critical step.
Trusted Brands We Service in Frisco
We work with a curated set of manufacturers so you get real choices without sourcing the materials yourself. For fencing that means names like Ameristar and Jerith for ornamental aluminum and iron, Bufftech for vinyl, and ActiveYards for a broad mix of vinyl and composite styles. We don’t claim to stock parts or run a warehouse; we spec the right brand for your lot, confirm lead times, and coordinate delivery to the site. Because we work with more than 50 name-brand manufacturers across our trades, the material conversation is a service, not an upsell.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Frisco Homes
- Shallow posts in expansive clay. A lot of original fences were set too shallow for black clay that heaves and settles hard between wet springs and drought summers. The result is a fence line that racks and leans within a few seasons, even when the boards themselves are still good.
- Utility strikes during digging. In the newer northern subdivisions, unmarked or freshly buried lines are a routine encounter when you dig post holes. Hitting one turns a simple install into a repair and an inspection sign-off delay, which is why locates come first and line-protection allowances belong in the scope.
- Shared fences and party-wall disputes. Tight-lot subdivisions put neighbors close together, and the original builder fence sometimes straddles the property line with no survey on hand. Knowing who owns which section and giving proper notice before replacement keeps the project civil.
- Hail and straight-line wind damage. The region’s storms don’t just wear on roofs; they knock panels loose, crack vinyl in cold snaps, and bow gates. A repair quote should separate wind damage from ordinary wear so you fix the right thing.
Pricing for Fence Installation in Frisco, TX
Fence pricing in Frisco comes down to material, linear feet, post depth, and how much the site constrains access. On a tight lot or a shared line, staging and labor can shift the number, so we give you a written line-item quote and the final price is set by that estimate. These are typical estimated ranges for the two most common upgrades:
| Service | Typical Estimated Range |
|---|---|
| Vinyl Fence Installation | $3500 – $9000 |
| Aluminum Fence Installation | $4000 – $10000 |
Wood, chain link, privacy builds, and repairs are quoted per job based on the same factors. Call (833) 620-7367 for a free estimate and an exact number for your lot.
We Also Serve Cities Near Frisco
Our fence installation team works throughout the surrounding area, including The Colony, Little Elm, Paloma Creek South, and Carrollton. The same clay soil and dense-subdivision conditions show up across these communities, so the approach to post depth, locates, and shared-line notice carries over. If you’re just outside the city limits, call and we’ll confirm coverage.
Serving Frisco, TX – Our Local Coverage Area
We serve Frisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Frisco
Most fence installations in Frisco do require a permit, so ask the city’s building department before you start, and plan for the inspection that follows. A tight lot affects more than paperwork: limited staging, shared lines, and HOA height rules all shape the scope. We handle the permit pull and the inspection sign-off as part of the job. Call (833) 620-7367 for a free estimate.
You should confirm the property line with a survey first, then give your neighbor clear written notice before any work begins on a shared fence. In these tight subdivisions the original builder fence sometimes straddles the line, so knowing who owns which section prevents a dispute. We’ll walk the line with you and document it in the quote. Call (833) 620-7367 to get started.
The black clay here expands and contracts hard through wet springs and drought summers, so posts set too shallow will heave and rack the fence within a few seasons. We set posts deeper and with better drainage than the original builder install, and we often recommend a gravel or concrete mow strip to keep the base dry. That foundation work is what keeps a fence straight long term. Call (833) 620-7367 for a free estimate.
We call for utility locates before any digging, and if a line still turns up where the plat didn’t show it, work pauses until it’s protected and any repair is signed off. In newer northern subdivisions, freshly buried irrigation, pool, and data lines are a routine encounter, which is why line-protection allowances are spelled out in the scope before the first hole is dug. Call (833) 620-7367 to schedule your estimate.
Yes. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, so a Sunday estimate is easy to book. We’re closed Saturday. Call (833) 620-7367 and we’ll get your free estimate on the calendar.
Whether you’re replacing a leaning builder fence in a newer Frisco subdivision or repairing storm-damaged panels, one contractor can handle the fence and the rest of your property upgrade, from roofing to driveway and pavers. Call (833) 620-7367 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Frisco.