Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Frisco Homeowners
A fence in Frisco has to hold up against two very different seasons: a summer that pushes well past 100 degrees and heavy spring storms that can drop several inches of rain in an afternoon. Wood shrinks and warps in that heat, vinyl can bow if the posts aren’t set deep enough, and a chain link that looked fine last year can start leaning after the soil swells and settles. That’s the problem we solve. Our technicians have up to 11 years of experience setting posts, bracing gates, and matching fence materials to the way Frisco yards actually drain and shift, and we can frequently get a fence repair or replacement visit scheduled the same day. We handle the whole job under one contract, from the posts to the gate hardware, so you’re not chasing down a separate gate installer when the latch stops catching. Call (833) 620-7367 to get a free, no-obligation estimate for your property.

What Our Fence Installation Service Includes
Every fence we put up starts with a look at your property line, the soil, and how water moves across the lot. Then we match the material to the job. Here’s what each type covers.
Wood Fence
A wood fence is the most common choice for privacy in Frisco and the easiest to customize to a yard’s exact slope and corners. You’ll want it when you need solid screening, a dog run boundary, or a style that matches a traditional home. We set the posts in concrete below the local frost-free depth, choose rot-resistant species suited to our humidity, and space the pickets for airflow so boards don’t cup in the heat.
Chain Link Fence
Chain link is the practical answer when you need a boundary that’s durable, affordable, and low-maintenance, and it’s often what code or HOA rules permit for side and rear property lines. You need it when security and containment matter more than appearance, or when you’re fencing a larger acreage. We tension the fabric properly, set terminal posts with concrete collars, and use galvanized or vinyl-coated components that resist the North Texas sun.
Vinyl Fence
A vinyl fence gives you the look of painted wood with none of the repainting, and it’s a strong fit for the newer subdivisions around Frisco where HOA rules favor a clean, uniform appearance. You’d choose it when you want a privacy fence that stays bright white or tan through years of summer sun. We use UV-stabilized vinyl from ActiveYards and Bufftech, set posts deep enough to handle expansive clay soil, and leave the recommended expansion gaps so panels don’t buckle.
Aluminum Fence
An aluminum fence is the choice for ornamental boundaries, pool enclosures, and front yards where you want definition without blocking the view. You’d pick it when HOA covenants call for wrought-iron style, or when you want a fence that won’t rust or need refinishing. We install powder-coated aluminum from Ameristar and Jerith, level the panels across grade changes, and set self-closing, self-latching gates that meet pool safety requirements where local code applies.
Iron Fence
A wrought iron fence brings a permanent, heavy look that suits larger estates and homes where curb appeal is part of the design. You’d want it for a formal front boundary, a security perimeter, or a gate that has to carry real weight. We weld and anchor iron sections properly, apply a rust-inhibiting finish, and set posts with footings sized to the fence’s weight so it doesn’t sag over time.
Fence Repair
Not every fence needs replacing. A leaning post, a sagging gate, or a section of storm-damaged pickets can often be repaired for a fraction of a new install. You need repair when a fence is mostly sound but a few components have failed, or when a gate no longer lines up with its latch. We diagnose whether the problem is the post footing, the hinges, or the framing, and fix just what’s broken so you keep the fence you’ve already got.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
We work with a curated group of fence manufacturers because the difference between a fence that lasts fifteen years and one that lasts five usually comes down to the material and how it’s engineered. Ameristar aluminum products are built with a rackable design that lets panels follow a slope without gaps, which matters on Frisco lots that aren’t perfectly flat. Jerith ornamental fencing uses welded, powder-coated assemblies that hold their finish through our sun and humidity, and we know which of their profiles best suit pool enclosures versus front-yard boundaries.
For vinyl, we specify ActiveYards and Bufftech because both manufacturers use UV-stabilized compounds that resist the yellowing and brittleness that cheaper vinyl develops in Texas heat. We’re familiar with their post-and-rail systems and the reinforcement options that keep a wide gate from sagging. Whether you have Ameristar, Jerith, ActiveYards, Bufftech, or any other make, we can help you repair, extend, or match it. Our reach across more than 50 name-brand manufacturers also means we can source hardscape and roofing materials for the same property if your project grows beyond the fence line, for instance pairing a new fence with driveway pavers from Belgard or Unilock.
Signs You Need Fence Installation Right Now
- Posts that lean or wobble. When a post shifts, the whole run of fence pulls out of alignment. That usually means the footing has failed or the soil has moved, and it gets worse with each rain. A leaning post is a repair before it becomes a full replacement.
- Sagging or dragging gates. A gate that scrapes the ground or won’t latch is a security gap and a sign the hinges or frame have warped. Left alone, the gate twists the fence section it’s hung on.
- Cracked, splintered, or rotted boards. Rot spreads along a wood fence faster than most homeowners expect in our humidity. Catching soft spots early lets us replace pickets and rails instead of the whole run.
- Storm damage from wind or hail. North Texas storms can bend chain link, crack vinyl panels, and knock down sections in a single afternoon. If a storm has left your fence compromised, an assessment tells you whether it’s a repair or a rebuild before it becomes a bigger problem.
- A gate or boundary that no longer meets your needs. Maybe you’ve added a dog, a pool, or a new driveway that reshapes the yard. If your current fence doesn’t contain what it needs to, it’s time to talk about a new layout.
Our Fence Installation Process – Step by Step
We keep the process transparent so you know what’s happening at every stage, from the first call to the final walkthrough.

- 1
Free on-site estimate and property walk. We measure the run, check the soil and drainage, review any HOA or city rules that affect height and setback, and talk through material options. You get a written, line-item quote with no surprises.
- 2
Permits and utility marking. Where a permit is required, we pull it and schedule the inspection yourself-handled step, and we call for utility locates so no one hits a line digging posts. This is the step that prevents costly mistakes.
- 3
Post setting and layout. We set posts in concrete at the depth our soil demands, string the line for a straight run, and brace the corners so everything holds true. Gate posts get oversized footings so the gate swings clean for years.
- 4
Panel and gate installation. We hang panels, install gates with the right hardware, and level everything across grade changes. Slopes get stepped or racked panels rather than gaps at the bottom.
- 5
Final walkthrough and cleanup. We walk the fence line with you, test every gate, and clear all debris. You leave with a fence that’s straight, secure, and installed to the written plan.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Frisco?
Fence pricing in Frisco depends on the material, the linear footage, the terrain, and whether gates and permits are involved. A typical vinyl fence installation in Frisco runs $3,500-$9,000 depending on length and style, and a typical aluminum fence installation runs $4,000-$10,000. These are estimated ranges for planning; your written estimate sets the final price. Factors that move the number include how many gates you need, whether the ground needs clearing or retaining work, the height of the fence, and HOA or code requirements that call for specific materials. To avoid overpaying, get a line-item quote that separates materials, labor, gates, and permit costs, and confirm what’s included before work starts. Our free estimate covers everything: material selection, post depth for our soil, gate hardware, inspection coordination where required, and haul-away. There’s no change-order surprise because the quote is fixed to the scope you approve.
Fence Installation Near Frisco – Our Service Area
We install and repair fences throughout Frisco and the surrounding communities, including Little Elm, The Colony, Paloma Creek South, Providence Village, Lewisville, Carrollton, Addison, Corinth, Highland Village, Farmers Branch, and Coppell. Whether you’re in a newer subdivision off the tollway or an established neighborhood closer to the lake, we work the same way: measure the lot, match the material to the climate and the HOA, and stand behind the install. If you’re weighing a fence alongside other exterior work, we handle fence installation in neighboring Little Elm too, and fence installation in The Colony, so your whole property can move forward on one schedule. For broader projects, see our full Construction Frisco services.
Serving Frisco, TX – Our Local Coverage Area
We serve Frisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Frisco
Fence installation is the process of setting posts, hanging panels or fencing fabric, and installing gates to create a boundary, privacy screen, or enclosure around a property. It involves site layout, post footings sized to the soil, and material selection matched to local weather and HOA rules. We handle the full job under one contractor, from permits to gate hardware. Call (833) 620-7367 for a free estimate.
Most residential fence installations take one to three days depending on linear footage, material, and how many gates are involved. Larger properties or jobs that need permit inspections can take longer. We give you a realistic timeline with the written estimate so you can plan around it. Call (833) 620-7367 to get a schedule for your property.
Typical estimated ranges are $3,500-$9,000 for vinyl and $4,000-$10,000 for aluminum, depending on length and features. Wood, chain link, and iron vary based on material and terrain. These ranges are for planning and your written estimate sets the final price. Call (833) 620-7367 for an exact quote; estimates are free.
Yes, we install and repair Ameristar and Jerith aluminum and ornamental fences, and we’re familiar with their gate hardware and rackable panels. We also work with ActiveYards and Bufftech vinyl systems. If your fence is one of these brands, we can match or repair it. Whether you have Ameristar, Jerith, or any other make, we can help. Call (833) 620-7367 to book an assessment.
We can often schedule a fence repair or assessment the same day, and installations are booked as soon as the scope and materials allow. For urgent issues like a storm-damaged or leaning fence, let us know when you call. We answer 24/7, with fast dispatch from 7am to 7pm. Call (833) 620-7367 so we can get you on the books.
We back our installed fencing with a workmanship warranty alongside the manufacturer’s material warranty for products like Ameristar, Jerith, ActiveYards, and Bufftech. Warranty terms are explained in your written estimate so you know exactly what’s covered. Ask us about coverage for gates and hardware when you call. Call (833) 620-7367 with any warranty questions.
Clear the fence line of furniture, planters, and anything stored against the existing fence, and make sure we can reach the property line with equipment. If you have an HOA, have your approval or design guidelines ready so we can confirm height and material rules. We handle utility locates and permits where required. Call (833) 620-7367 to confirm prep details for your property.
Schedule Your Fence Installation Service in Frisco Today
If you’re ready to put up a fence that stands straight through Frisco’s heat and rain, or fix the one that’s starting to lean, we’re ready to help. Call (833) 620-7367 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One contractor, every trade, and a written quote before any work begins. If your project runs beyond the fence line, we also handle related exterior work like fence installation and driveway and paver projects across Frisco.
Written by the team at Construction Frisco.